P Polyphaeon Well-Known Member Joined Oct 25, 2013 Messages 95 Reaction score 2 Jul 3, 2014 #1 Moved my STC from a keggorator to a ferm chamber and it will not let me set the temp over 10c (50F)! Is this normal? Is there a work around? thanks!
Moved my STC from a keggorator to a ferm chamber and it will not let me set the temp over 10c (50F)! Is this normal? Is there a work around? thanks!
day_trippr Foxtrot Delta Tango HBT Supporter Joined May 31, 2011 Messages 50,070 Reaction score 47,873 Location Stow, MA Jul 3, 2014 #2 According to the STC-1000 user manual, the set point range is from -50C to +99.9C. Normally I'd suspect there's a set point limit that's blocking you, but from the manual it doesn't appear this unit has that function...
According to the STC-1000 user manual, the set point range is from -50C to +99.9C. Normally I'd suspect there's a set point limit that's blocking you, but from the manual it doesn't appear this unit has that function...
raouliii Well-Known Member Joined Aug 8, 2011 Messages 1,007 Reaction score 121 Location Ponchatoula Jul 3, 2014 #3 Are you certain it's an STC1000 and not one of the other, look-alike, units?
OP OP P Polyphaeon Well-Known Member Joined Oct 25, 2013 Messages 95 Reaction score 2 Jul 4, 2014 #4 It says STC1000 on it. I've mashed the buttons in every possible combination.... But it sounds like I have my answer - no it is not a thing for these units. I will play around with it some more and see what I can come up with. thanks
It says STC1000 on it. I've mashed the buttons in every possible combination.... But it sounds like I have my answer - no it is not a thing for these units. I will play around with it some more and see what I can come up with. thanks
Pkrd Supporting Member HBT Supporter Joined Dec 27, 2012 Messages 4,315 Reaction score 6,355 Location New Zealand Jul 4, 2014 #5 Temp setpoint F1 is 99.9C max, but the diff, time delay and cal values are all 10. I think you need to mash those buttons some more.
Temp setpoint F1 is 99.9C max, but the diff, time delay and cal values are all 10. I think you need to mash those buttons some more.
raouliii Well-Known Member Joined Aug 8, 2011 Messages 1,007 Reaction score 121 Location Ponchatoula Jul 4, 2014 #6 I think pkrd is on to something. Make sure it's the setpoint you're adjusting and not something else (with a 10 max).
I think pkrd is on to something. Make sure it's the setpoint you're adjusting and not something else (with a 10 max).
OP OP P Polyphaeon Well-Known Member Joined Oct 25, 2013 Messages 95 Reaction score 2 Jul 6, 2014 #7 Yup. That was the issue. It is working excellently now. Thanks all.