Show us your Kegerator

[NeoBrew]

Mostly finished with this. Waiting on a new tap handle. Still need to drop the drip tray so it is flush with the bar top and get my neon in place.

You know, you were looking awesome with this build, until I saw this...

 

[mcmike54]

You know, you were looking awesome with this build, until I saw this...

View attachment 684299

View attachment 684300

I'm I Miller Lite drinker but I can't get a keg of it right now. Think its to do with the bars reopening. Settled on Bud Light because thats all they had. Used to drink it so still had the handle. New handle is a H-D piston.

 

[NeoBrew]

I'm I Miller Lite drinker but I can't get a keg of it right now. Think its to do with the bars reopening. Settled on Bud Light because thats all they had. Used to drink it so still had the handle. New handle is a H-D piston.

LOL! Way to double down on that one.

 

[Nick Poggetti]

What's the difference in faucets? I notice yours are "fancier" than my standard one. Is it just that, fancy, or is there more beer science to it?

Hmm I'm not sure. I bought the basic stainless intertap faucets for the first 7. The far right is a taprite stout faucet.

 

[darkhollow]

Done mine one-armed bartender with mogol.tech scanner for pouring control.

 

[Tx911guy]

Mostly finished with this. Waiting on a new tap handle. Still need to drop the drip tray so it is flush with the bar top and get my neon in place.View attachment 684263View attachment 684266View attachment 684265

that’s an amazing setup! What did you use to seal the area between the kegerator and the tower? I’m thinking of doing something simila.

 

[shoengine]

Here's my build just finished. Credit to @Sailingeric for the 5 tap handles in the middle, great little addition.

Now that is variety.

 

[tbone.brews]

Here’s my current setup. Just got a new 3 tap draft tower and gas manifold. Oktoberfest and red ipa on tap

What refrigerator model did you use for this? I'm looking to do something similar.

 

[TenaCJed]

Just got the tap handle today actually

Where did you get that Dead handle from?

 

[Frogster762]

I found the dead handle on tall pine designs website. They do have the OG skull and lighting bolt as well. The handles are 3D printed but they’re solid. Totally worth the 20-30$. Definitely unique compared to most tap handles I’ve seen on amazon etc.

 

[Frogster762]

Closer view l.

 

[k-os]

Have added a bunch of stickers (on magnetic sheet) since this picture. Made from a Danby Designer 11 Cubic Foot freezerless fridge. Thinking I may drill a larger hole in the rear condensation drain so I can move the regulator outside the fridge.

 

[day_trippr]

That's already pretty clean - and nicely done - but if you can route your drip tray drain back through the door it'd be pristine...

Cheers!

 

[Pkrd]

Have added a bunch of stickers (on magnetic sheet) since this picture. Made from a Danby Designer 11 Cubic Foot freezerless fridge. Thinking I may drill a larger hole in the rear condensation drain so I can move the regulator outside the fridge.

I managed to stretch 3mm vinyl tubing over my gas barbs to run it in the drain hole.

 

[k-os]

I managed to stretch 3mm vinyl tubing over my gas barbs to run it in the drain hole.

I'm using DuoTight/John Guest fittings right now so I have 8mm OD line.

 

[seanjwalker1]

Converted a single tap black matte Arctic King into a faux stainless steel 2 tap. 5 gallons Munich Helles, 3 gallons Honey Irish Red. My 1st kegging ever!

 

[vandalay]

my own personal corner

 

[greywolf]

Here she is after the latest rebuild.

Six taps now. Pours pretty nice.

 

[Doed]

@greywolf I really like the handle for the keezer lid, where did you get that?

 

[greywolf]

That's from a jeld-wen patio door. Used the mounting plate only from one side and it screwed right into the existing holes in lid. Mounted the other handle and plate to it with shortened screws. Satin nickel finish. Had an idea while having a few(doesn't that always happen?) and put it together in 10 minutes or so.

 

[greywolf]

Looking at the picture reminded me that I upgraded the drip tray, too. The original was made from a scrap piece of flourescent light cover. It wirked ok but was a bear to clear. Made a new one from a piece of gutter cover. A little creative "unbending" and I got this. Much better look and easier to clean. Used $2 worth of the cover.

 

[Yesfan]

@greywolf What kind of taps are you using? Never seen those before.

Great looking keezer!

 

[Wobblybob]

View attachment 684336
Done mine one-armed bartender with mogol.tech scanner for pouring control.

 

[Wobblybob]

Man I really like that.
different as different can be and functional and looks amazing nice job

 

[greywolf]

What kind of taps are you using? Never seen those before.

Thank you. I love seeing our collective creativity on display. Those are picnic taps on a permanent base made from a plumbing fitting. Work really well and cheap. There's a build thread under "low budget taps".

 

[Yesfan]

View attachment 692883View attachment 692884View attachment 692886
Thank you. I love seeing our collective creativity on display. Those are picnic taps on a permanent base made from a plumbing fitting. Work really well and cheap. There's a build thread under "low budget taps".

I thought they looked like picnic taps, but was like "nah". I figured it was some new overseas brand or something. Pretty ingenious!

 

[Tobor_8thMan]

Very creative. That's what I enjoy about HBT. A lot of knowledgeable, creative, DIY, etc fellow homerbrewers.

 

[rwinzing]

Adding a four tap tower this week. I should be able to easily fit 8 kegs but will start with 6.

 

[Ki-ri-n]

Adding a four tap tower this week. I should be able to easily fit 8 kegs but will start with 6.




View attachment 695293View attachment 695294

Nice! Only "problem" I have with it is that your pic says "On Tap" and shows a bottle pouring a beer.
But I don't have a nice display like yours, so I'm just jelly

 

[rwinzing]

Nice! Only "problem" I have with it is that your pic says "On Tap" and shows a bottle pouring a beer.
But I don't have a nice display like yours, so I'm just jelly

HA!, didn't even think of that. Now I am going to have to change it.

 

[Tobor_8thMan]

Adding a four tap tower this week. I should be able to easily fit 8 kegs but will start with 6.




View attachment 695293View attachment 695294

Very nice. Kudos.

 

[crusader1612]

Adding a four tap tower this week. I should be able to easily fit 8 kegs but will start with 6.




View attachment 695293View attachment 695294

How did you get your screen running? I'm trying to do something similar? Is it raspbeery pi or just a wb based program?

 

[rwinzing]

How did you get your screen running? I'm trying to do something similar? Is it raspbeery pi or just a wb based program?

It is a called taplist Digital Beer Menus for TVs and More You can run it off an Fire Stick App

 

[crusader1612]

It is a called taplist Digital Beer Menus for TVs and More You can run it off an Fire Stick App

Nice, is there a tutorial anywehre I can look through? I'm notthe most tech savvy person around.

 

[rwinzing]

Nice, is there a tutorial anywehre I can look through? I'm notthe most tech savvy person around.

They may have some online at the site. It is pretty easy to use.

 

[bracconiere]

I'm I Miller Lite drinker but I can't get a keg of it right now. Think its to do with the bars reopening. Settled on Bud Light because thats all they had. Used to drink it so still had the handle. New handle is a H-D piston.

LOL, i was going to say something about the bud light tap too....but don't worry, i don't buy beer often, but when i do it's miller!

(and i add gluco to all my homebrew to make it light beer too, so no points lost from this judge! )

 

[Gray Matter]

Nice, is there a tutorial anywehre I can look through? I'm notthe most tech savvy person around.

They have a pretty straightforward documented setup process.

Set up an Amazon Fire TV as a Digital Beer Menu

 

[Tobor_8thMan]

Don't forget about Raspberry Pints

http://www.homebrewtalk.com/threads...taplist-solution.487694/page-164#post-8953731

 

[beersk]

Just got this put together yesterday. It's an adjustment lifting kegs over a collar whereas before the collar was built in with the lid. Decided not to do that with this one. A stepping stool is on my shopping list.

And by the way, the 7cu ft GE chest freezer listed in the Freezer Specs thread DOES NOT fit 4 kegs on the floor.

 

[xrobevansx]

Just semi finished it yesterday.