Show us your Kegerator

[Frogster762]

Just got the tap handle today actually

 

[Wobblybob]

Boom

 

[Gengasi]

Just got my first kegerator up an running before college Struggled a bit with flow meters, but got that sorted out yesterday Driptray also has a glass cleaner/flusher mounted connected to a gallon of water inside the fridge, so that the glasses are chilled down and rinsed of soap residue.

 

[Ultryx]

This is my first kegerator and kegging setup. She's seen 4 corny kegs worth of brews so far and is keeping up like a champ. I drilled and mounted the tower myself and got the fridge on CL used.

 

[Drunken Draftsman]

Shout out to quarantine for giving me the time and energy to wrap this up!

Write up on my build: Quarantine Keezer Build

 

[Foltzwagon Brewing]

Used our extra free time over the past few weeks to upgrade to a bigger keezer. I wanted to share our version of a hanging drip tray, pretty happy with how it turned out.

 

[mcmike54]

Mostly finished with this. Waiting on a new tap handle. Still need to drop the drip tray so it is flush with the bar top and get my neon in place.

 

[Wobblybob]

That is AWSOME ! I love tap handles can’t wait to see what you put on there. That is a fantastic job I would never leave that area if you’re retired good. If you’re not retired you should retire and just sit there and drink beer for the rest of your life.

 

[Nick Poggetti]

Here's my build just finished. Credit to @Sailingeric for the 5 tap handles in the middle, great little addition.

Here's a link to the full progress pic build with descriptions along the way.

 

[mcmike54]

Here's my build just finished. Credit to @Sailingeric for the 5 tap handles in the middle, great little addition.

Here's a link to the full progress pic build with descriptions along the way.

View attachment 684293View attachment 684294

What's the difference in faucets? I notice yours are "fancier" than my standard one. Is it just that, fancy, or is there more beer science to it?

 

[NeoBrew]

Mostly finished with this. Waiting on a new tap handle. Still need to drop the drip tray so it is flush with the bar top and get my neon in place.

You know, you were looking awesome with this build, until I saw this...

 

[mcmike54]

You know, you were looking awesome with this build, until I saw this...

View attachment 684299

View attachment 684300

I'm I Miller Lite drinker but I can't get a keg of it right now. Think its to do with the bars reopening. Settled on Bud Light because thats all they had. Used to drink it so still had the handle. New handle is a H-D piston.

 

[NeoBrew]

I'm I Miller Lite drinker but I can't get a keg of it right now. Think its to do with the bars reopening. Settled on Bud Light because thats all they had. Used to drink it so still had the handle. New handle is a H-D piston.

LOL! Way to double down on that one.

 

[Nick Poggetti]

What's the difference in faucets? I notice yours are "fancier" than my standard one. Is it just that, fancy, or is there more beer science to it?

Hmm I'm not sure. I bought the basic stainless intertap faucets for the first 7. The far right is a taprite stout faucet.

 

[darkhollow]

Done mine one-armed bartender with mogol.tech scanner for pouring control.

 

[Tx911guy]

Mostly finished with this. Waiting on a new tap handle. Still need to drop the drip tray so it is flush with the bar top and get my neon in place.View attachment 684263View attachment 684266View attachment 684265

that’s an amazing setup! What did you use to seal the area between the kegerator and the tower? I’m thinking of doing something simila.

 

[shoengine]

Here's my build just finished. Credit to @Sailingeric for the 5 tap handles in the middle, great little addition.

Now that is variety.

 

[tbone.brews]

Here’s my current setup. Just got a new 3 tap draft tower and gas manifold. Oktoberfest and red ipa on tap

What refrigerator model did you use for this? I'm looking to do something similar.

 

[TenaCJed]

Just got the tap handle today actually

Where did you get that Dead handle from?

 

[Frogster762]

I found the dead handle on tall pine designs website. They do have the OG skull and lighting bolt as well. The handles are 3D printed but they’re solid. Totally worth the 20-30$. Definitely unique compared to most tap handles I’ve seen on amazon etc.

 

[Frogster762]

Closer view l.

 

[k-os]

Have added a bunch of stickers (on magnetic sheet) since this picture. Made from a Danby Designer 11 Cubic Foot freezerless fridge. Thinking I may drill a larger hole in the rear condensation drain so I can move the regulator outside the fridge.

 

[day_trippr]

That's already pretty clean - and nicely done - but if you can route your drip tray drain back through the door it'd be pristine...

Cheers!

 

[Pkrd]

Have added a bunch of stickers (on magnetic sheet) since this picture. Made from a Danby Designer 11 Cubic Foot freezerless fridge. Thinking I may drill a larger hole in the rear condensation drain so I can move the regulator outside the fridge.

I managed to stretch 3mm vinyl tubing over my gas barbs to run it in the drain hole.

 

[k-os]

I managed to stretch 3mm vinyl tubing over my gas barbs to run it in the drain hole.

I'm using DuoTight/John Guest fittings right now so I have 8mm OD line.

 

[seanjwalker1]

Converted a single tap black matte Arctic King into a faux stainless steel 2 tap. 5 gallons Munich Helles, 3 gallons Honey Irish Red. My 1st kegging ever!

 

[vandalay]

my own personal corner

 

[greywolf]

Here she is after the latest rebuild.

Six taps now. Pours pretty nice.

 

[Doed]

@greywolf I really like the handle for the keezer lid, where did you get that?

 

[greywolf]

That's from a jeld-wen patio door. Used the mounting plate only from one side and it screwed right into the existing holes in lid. Mounted the other handle and plate to it with shortened screws. Satin nickel finish. Had an idea while having a few(doesn't that always happen?) and put it together in 10 minutes or so.