Plumbing 3 SQ14s in a single tier system

[correctchanged]

I am building a single tier system and want to use 3 SQ14s plumbed to run from a single 20lb propane tank and need a little guidance regarding which regulator/needle valves/feeder line size & make up.

I have searched the threads for some time now, and have been unable to find anyone doing this.

Any help will be greatly appreciated!

 

[Stealthcruiser]

How many burners will you run at one time?

 

[correctchanged]

Hi Stealthcruiser, thanks for replying,

Even though I plan to only have two going at a time, I may like the flexibility of running all 3.

 

[Stealthcruiser]

Lots of folks will plumb their single tier systems with 3/8 tubing, all the way up to 1 inch black iron piping, that I have seen!
I'll have to let the others chime in, that have such setups.

 

[Rivenin]

made mine from 1/2 black iron pipe along with 2 sections from the watts fitting area at home depot.
This would have been around 2 years ago, so unfortunately i do not have any numbers or anything
Do you have any ideas on how you want to run it? ir'd be way helpful

 

[acidrain]

30 psi reg to some 3/8 iron pipe with ball valves for each burner. From there, 1/4" copper to each of the burners. Get yourself one of those battery powered electronic ignitors ... invaluable!

 

[I-Hop]

Thanks for posting. I am building a rig as well and was wondering the same. I will keep an eye on what everyone has to say. I myself am running 3 burners.