• If you have bought, sold or gained information from our Classifieds, please donate to HomeBrewTalk and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

  • Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Virginia Northern Virginia Moving Sale

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

speaste

Member
Joined
Dec 27, 2014
Messages
14
Reaction score
0
I'm moving and not taking most of my home brewing gear. I have the following stuff for sale:

1 20lb C02 Tank (EMPTY) 40.00 SOLD
1 10lb CO2 Tank (Full) 40.00 SOLD
1 MaltMill Grain Mill - 65.00 SOLD
1 3 Gal Ball Lock Keg (Nearly new carbonated water use only) - 70.00 SOLD
1 Mini Jet Filter System with a TON of all different size filters - 65.00 SOLD
1 Dual Out CO2 Regulator - 40.00 SOLD
Shirron Forward Sealing Faucets - 40.00 each (I have 4)SOLD

Still HAVE:

2 4" Faucet Shanks


In addition More Stuff I found:

2 Stir Plates (These are old school and big, heavy, and ugly lab type at least one of the two work - I'll get some pics up) 5 $$ each

A 2000ml Flask with two stir bars $15 SOLD

copper immersion wort chiller (7") $35

I just found two Johnson Controls Temp Controllers. I'm offering these at 30 bucks each (plus shipping of course) <-----NEW

I still have a ton of wine bottles for PICKUP at 5 BUCKS A CASE (MOST ARE NEW).

I have a bottle tree (45 bottles) with Sanitize dish/sprayer at the top for 20 bucks (Pickup please).

See New pics at end of thread.


Everything is available to see in the Northern Virginia area. I will ship small items at your cost. I will NOT ship CO2 tanks.

PM Me for Photos of a specific item.

Thanks!
 
I'm interested in the mill. Can you tell me the model? Would you ship to MD?
 
IMG_5229.jpg

Sorry if I screw up the picture. New to posting pics here.
 
So I also have a refractometer in case for 30 bucks. and 4" Shanks for the Faucets for 10 bucks each. Pics Below including faucets.

[/ATTACH][/ATTACH]
 

Attachments

  • IMG_5233.jpg
    IMG_5233.jpg
    132.4 KB
  • IMG_5232.jpg
    IMG_5232.jpg
    87.8 KB
  • IMG_5231.jpg
    IMG_5231.jpg
    64.2 KB
Here is a pic of the box for the filter. I'll work on getting back to it to get it out and take some pics. Comes with a big bunch of filters. IMG_5225.jpg
 
I am interested in two faucets with shanks, mailed to 19041. Could you tell me the total costs with shipping if two are still available (I think it comes to $100 plus shipping).

thanks, Ken
 
I tried to send pm not sure if it went through . I'll take them both , let me no how much for shipping and payment info. thanks ,ben
 
I'm going to update top of this post later today but the following items have been claimed/sold. If something comes up I'll make them available again but right now the following items are listed as sold:

Dual out CO2 regulator
20 lb CO2 Tank (empty)
Mini Jet Filter and Filter pads
3 Gallon Keg
2 of 4 faucets
2 of 4 shanks
MaltMill

As mentioned I will update the top of the thread in a bit after I get the invoices out for the above.
 
Stir plates are as is. 5.00 each. I know at least one of the two was working. Not sure if both were or not. They have RPM and heat controls.
 
I also now have a single 5 Gallon Ball Lock Keg. Held pressure at last check. Since I sold all my stuff I can't recheck :) Offering for Washington DC area pickup only. $40. PM me if interested.
 
Here's a pic of the offered Johnson Controls temp controller. (I have 2 available).

They are used and offered for 30 bucks each.

IMG_5241.jpg
 
So I have the following items which did not settle and are still for sale. Great deals!

Refractometer in case

Immersion chillechiller

Johnson controller

Who's interested?
 
Back
Top