• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

No carbination

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Bmbundy

New Member
Joined
Dec 17, 2011
Messages
3
Reaction score
0
I just brewd a batch of porter, I opened my first bottle tonight but there was zero carbination. What gives? It was a 12 oz bottle and I used a carbination pellot. What is the deal
 
If you JUST brewed a batch of beer, more than likely it's not carbed because you haven't waited long enough.

The 3 weeks at 70 degrees, that we recommend is the minimum time it takes for average gravity beers to carbonate and condition. Higher grav beers take longer.

Stouts and porters have taken me between 6 and 8 weeks to carb up..I have a 1.090 Belgian strong that took three months to carb up.


Temp and gravity are the two factors that contribute to the time it takes to carb beer. But if a beer's not ready yet, or seems low carbed, and you added the right amount of sugar to it, then it's not stalled, it's just not time yet.

Everything you need to know about carbing and conditioning, can be found here Of Patience and Bottle Conditioning. With emphasis on the word, "patience." ;)

If a beer isn't carbed by "x number of weeks" you just have to give them more time. If you added your sugar, then the beer will carb up eventually, it's really a foolroof process. All beers will carb up eventually. A lot of new brewers think they have to "troubleshoot" a bottling issue, when there really is none, the beer knows how to carb itself. In fact if you run beersmiths carbing calculator, some lower grav beers don't even require additional sugar to reach their minimum level of carbonation. Just time.

I've carbed hundreds of gallons of beer, and never had a beer that wasn't carbed, or under carbed or anything of the sort (Except for a batch where I accidently mixed up lactose or Maltodextrine for priming sugar). Some took awhile, (as I said up to six months) but they ALL eventually carbed.

I don't believe there are ANY carbing problems (besides the rare capper that maybe puts a bad seal on a bottle, or tired yeast in a HIGH gravity beer) that isn't simple impatience.

As I said in my bottling blog, it's really a fool proof process, you add sugar, keep the beer above 70 and wait.
 

Latest posts

Back
Top