New Basement Brewery Build

[Hoppopotomus]

Very, very nice work so far! I have been absent from HBT for too long and obviously have been missing out on some really cool builds.....yours included. I love the tile work and your plan of attack. Be patient and keep plugging away and it will all be worth it in the end. I'm about 90% complete on my brewery, but had to take a time out from brewing, HBT, and all of my brewing projects to pursue another business opportunity. Now that all of that crap is finalized, I can get back to what is really important.....BEER!

I just need to finish up flooring and clear coat some woodwork, then it's onto controls. I'm really leaning towards a BCS control panel, which hopefully will be coming down the pipe soon. Keep the pics coming and keep up the fantastic work!

 

[1fast636]

wow keep it up

 

[smittygouv30]

I've been following this build since the beginning. Excellent job man. It's turned out really awesome! I'm very jealous but also very excited for my turn once i'm a home owner. I cant wait to do something this outrageously awesome!

Any plans to get labels for your control panel? Everything looks so slick and sharp that the sticky tape labels just don't belong. Just saying

 

[highland_brewer]

Thanks... Yeah those are temporary.. Once i am sure everything is how i want it i will be replacing them

 

[highland_brewer]

So I got the hood installed... GEEEZ that thing is HEAVY... Should have had 3 men and a little boy.. BUT it was only my wife and I. Using straps and clamps and lots of sweat we got it into place. (Thank God OSHA did not stop by...lol)

one step closer!!

 

[highland_brewer]

So after I was posed the question of what I was putting under the kettles, of course it got my brain whirling.. Went to Home Depot and a few other places and found nothing large enough to suit my needs. So wound up at Joann's Fabrics and bought a roll of 5/32 cork board material and made my own.

Not a full 24" btw ... damn china!

Wound up getting 3 rounds out of the roll 15-3/4" ea. not bad considering the roll was 14.99 and the clerk alerted me to a circular with a 50% coupon.. so I paid like $8 for all three.. I love DIY!!

There are three there it is a bit hard to tell, but I think they are plenty thick

 

[mjohnson]

Thats lovely. Nice job!

 

[BostonianBrewer]

Subscribed : just found this thread and may i say you have done an amazing job , want to do my basement next ? Haha

 

[highland_brewer]

Subscribed : just found this thread and may i say you have done an amazing job , want to do my basement next ? Haha

how much money you willing to spend???... Lol

don't ask me how much money I spent because I don't want to even total it up!!!

 

[BeachBumBrew]

Man that looks great!! I am a new home brewer and don't have a house yet but when I have a bsmt that's what I wanna do. Keep it up and great pics by the way

 

[LandoLincoln]

Man, that SS hood really makes it look so great.

 

[highland_brewer]

Man, that SS hood really makes it look so great.

thanks the only thing I don't know about is my lights I'm thinking of moving them back just a little bit so that they have a better angle to the pots but it's still pretty well lit

 

[LandoLincoln]

thanks the only thing I don't know about is my lights I'm thinking of moving them back just a little bit so that they have a better angle to the pots but it's still pretty well lit

Yeah, I noticed that. I'd probably move the lights back as well.

 

[fireslayer]

Great looking build!

 

[IamCanadian]

So I got the hood installed... GEEEZ that thing is HEAVY... Should have had 3 men and a little boy.. BUT it was only my wife and I. Using straps and clamps and lots of sweat we got it into place. (Thank God OSHA did not stop by...lol)

one step closer!!

Your setup looks totally SICK! Nice job man. Where did you get that stainless steel table and how much was it if you don't mind me asking?

 

[highland_brewer]

Your setup looks totally SICK! Nice job man. Where did you get that stainless steel table and how much was it if you don't mind me asking?

Not at all... It was a local rest. supply vendor. I was blown away by how inexpensive it was. ($149) Only thing is that is not completely stainless the bottom shelf and legs are galvanized. It is NSF certified though.

http://www.equippers.com/30W-x-72L-x-34H-Stainless-Steel-Work-Table/EWT30S72-STG.asp

 

[BeachBumBrew]

What about high hats like 6-6"

 

[highland_brewer]

What about high hats like 6-6"

??

 

[Hoppopotomus]

Amazing Job! The stainless hood just took this build to an entirely different level. Nice work!

P.S. the last poster was referring to the height of the ventilation hood and head clearance for taller folks.

 

[highland_brewer]

LOL hoppopotomus that's what I thought.. I am 6'3" and I have plenty of clearance.. 6'6" might brush the hood (depending on how much hair they have, I don't have much!!)

Thanks for the comments.. BTW I was trying to check out your builds, however I think the links to the photos are all broken.. Would love to see your "recreation" area..

 

[BeachBumBrew]

Maybe 5 high hats 1 center and then 2 on left and 2 on right and the led strips in the hood

 

[Hoppopotomus]

LOL hoppopotomus that's what I thought.. I am 6'3" and I have plenty of clearance.. 6'6" might brush the hood (depending on how much hair they have, I don't have much!!)

Thanks for the comments.. BTW I was trying to check out your builds, however I think the links to the photos are all broken.. Would love to see your "recreation" area..[/QUOTE]

Hmmmm? Let me check it out. I was just on a couple of my threads yesterday and the pics where all there, however, when I was checking out a few other DIY threads, people were commenting on how great they looked, but I wasn't seeing and pics. In one thread I couldn't start seeinf the OP's pics until page 4 and 5 of his thread???? I'll check it out and let you know.

 

[Hoppopotomus]

I just went through 5 of my threads and every picture is gone! We are talking about hundreds of pictures, which really sucks! I sent a message to the HBT administrators to see what the deal is. Hopefully it's just a glitch in their site and they can be retrieved. If not, I'll post a few updated pics.

 

[Pickled_Pepper]

...however, when I was checking out a few other DIY threads, people were commenting on how great they looked, but I wasn't seeing and pics. In one thread I couldn't start seeinf the OP's pics until page 4 and 5 of his thread???? I'll check it out and let you know.

I'm having the same problem. I can see the pics on highland's thread but not yours...and a few others I was looking at yesterday. I just assumed my "interwebs" had a glitch in the matrix.

 

[Hoppopotomus]

It appears as though it may be a widespread problem on HBT, as I was forwarded a link from yesterday with a number of people having the same issue. Evidently TxBrew is looking into the problem on HBT's end. I'm not trying to hijack your thread OP, but can anyone see these pics of my brewery that I am posting. Just wondering if freshly posted pics are showing up from my end.

 

[Hoppopotomus]

.....and here's my "recreation area" of my basement (my bar), since obviously the hundreds of pics on all of my threads are gone, I'll just post them here. The last set of pics was the "working area" Please let me know if you can see the pics.....another test run.

 

[Pickled_Pepper]

Is that a grain hopper in the 2nd photo?

 

[tjsaudio]

Brian things are looking real nice. When we build our new house I will have a more designated area to make just brewery. But yours is very nice great job

 

[Hoppopotomus]

Is that a grain hopper in the 2nd photo?

It's a grain storage chest with a motorized grain milling cabinet, so yes, it's the hopper for the mill.

Now back to the OP's thread and its pure awesomeness!

 

[wubears71]

Nice work. I love the build and love all the photos. That water table is nuts.