mrshungry4hops
Active Member
Hungry4hops is making a lot of progress on the flooring tonight!!
My Basement Bar Build!
- Thread starter hungry4hops
- Start date
Help Support Homebrew Talk:
Butchhe
Well-Known Member
Its looking real good.
mrshungry4hops
Active Member
Productive night! Flooring 98% finished!!
mrshungry4hops
Active Member
Finally done for the night & relaxing with one of hungry4hops homebrews! Peanut butter stout!
patthebrewer
Well-Known Member
- Joined
- Sep 21, 2012
- Messages
- 739
- Reaction score
- 73
Ack!!!....flooring. I did the flooring in my 1200 sqft basement, and on my first floor too. The only thing I remember was the the knees, the back, and all the Ibuprufen.......
Looking great though!
Looking great though!
Oldskooler
Supporting member
Great work..
rockinmarty
Big Member
were you at least wearing knee pads?
OP
OP
hungry4hops
Hop to it!
ugh! i forgot them at work yesterday, but i remembered them today! I was trying to squat as much as possible, but my knees still hurt anyway!
OP
OP
hungry4hops
Hop to it!
Ok finally got the flooring finished! Brought down the kegerator and started framing out the base for the bar! Probably go get plywood one day this week to start putting the bar together!
Oldskooler
Supporting member
Man 2x6's that is going to be one stout bar. Great work
OP
OP
hungry4hops
Hop to it!
Got the tv mounted in the corner picked up the plywood and my brother came over and helped me frame it out.
mrshungry4hops
Active Member
Made some progress on the bar build tonight!!
OP
OP
hungry4hops
Hop to it!
Got done work early today so I went home and worked on the bar some more. So glad I have a nail gun, I can't imagine doing it with out one. Now its mostly just trim work
OP
OP
hungry4hops
Hop to it!
kenmyfam
Well-Known Member
- Joined
- Feb 10, 2013
- Messages
- 126
- Reaction score
- 47
Looking mighty good so far. I am in the same process myself right now. I have a thread here on that as well. Just waiting on my 10ft long lump of solid oak for the bar top itself.
Not meaning to hi jack this thread by the way, just seeing a lot of parallels here.
Not meaning to hi jack this thread by the way, just seeing a lot of parallels here.
OP
OP
hungry4hops
Hop to it!
Wow that looks great! Are you going to do a drip tray? Im still undecided, and don't really know how to go about making one
OP
OP
hungry4hops
Hop to it!
Started putting on the trim work today, im pretty much learning as I go I don't normally do woodworking! Not sure If I should put molding inside the boxes, and what type of molding, or if I should just leave it the way it is. Anyone have any suggestions??
It looks good to me without a molding there.
A cabinet maker would often put a decorative edge on those boards before assembly, but they have the shaper blades to do it easily.
A molding can help to hide any gaps between the frame and the panel. It doesn't look like you have any worth worrying about.
I can think of one other reason to put a molding there. The frame will collect dust on the horizontal surface you are pointing toward. A molding that is thin at the edge where it meets the panel and tapers to wide at the edge where it meets the frame will help to shed the dust. That wouldn't be a big enough reason for me to decide though.
It really comes down to what style you want to see. Simple, plain frames or more decorative molded edges.
A cabinet maker would often put a decorative edge on those boards before assembly, but they have the shaper blades to do it easily.
A molding can help to hide any gaps between the frame and the panel. It doesn't look like you have any worth worrying about.
I can think of one other reason to put a molding there. The frame will collect dust on the horizontal surface you are pointing toward. A molding that is thin at the edge where it meets the panel and tapers to wide at the edge where it meets the frame will help to shed the dust. That wouldn't be a big enough reason for me to decide though.
It really comes down to what style you want to see. Simple, plain frames or more decorative molded edges.
kenmyfam
Well-Known Member
- Joined
- Feb 10, 2013
- Messages
- 126
- Reaction score
- 47
Going to include a beer gutter at the bartender side of the bar top. Going to be very heavily varnished oak (6+ coats) with a slight angle to a drain hole and tube going to a container at the back of the ceramic surface. Will post photos when I do it. A picture is worth a thousand words so they say.
kenmyfam
Well-Known Member
- Joined
- Feb 10, 2013
- Messages
- 126
- Reaction score
- 47
I think you are fine the way it is. What color stain are you going with ?? and more to the point what kind of wood are you using there ??? If it is a soft wood then I urge you to use the pre stain treatment to prevent it going patchy on you. The soft woods do not absorb the stain evenly. The pre treatment helps it absorb more evenly. I use it on the oak as well just to be safe.
Looks like you are coming along nicely there. Ours will be on hold from Friday till 12th March as we are heading to Costa Rica on vacation.
+1 to Kenmyfam. I'm a woodworker and cabinet maker (Look for my new bar HOPEFULLY this summer!) What I use is the General finishes line of products. Probably the best out there is the Charles Neil sealer, but it's pricey and you can get just fine finishes. If you have a wood working store (Not a big box store) in your area I would definitely go get some. Here's where you can order it online. http://www.rockler.com/product.cfm?page=30560&site=ROCKLER
It seals the softer wood and lets a much more even coat of stain go on. You will be very very thankful for using this stuff. You can take a much cheaper piece of wood and literally make it look like a million bucks!
Good luck! I can't wait to see the final results!
It seals the softer wood and lets a much more even coat of stain go on. You will be very very thankful for using this stuff. You can take a much cheaper piece of wood and literally make it look like a million bucks!
Good luck! I can't wait to see the final results!
OP
OP
hungry4hops
Hop to it!
Thanks for all the advice guys! The whole top of the bar is oak, everything else is pine, trying to keep it easier on the wallet. We picked up some minwax red mahogany 225 ill do a test piece tomorrow. And post up some pics.
kenmyfam
Well-Known Member
- Joined
- Feb 10, 2013
- Messages
- 126
- Reaction score
- 47
Looking forward to seeing your progress. Like I said, we are on hold till we get back from vacation. My bar top will be ready for me when I get back. The pine will need pre treatment for sure. Some folk make their own out of a paint thinners and varnish mix. 90% thinners and 10% varnish. If you buy the minwax version that's exactly what it looks and smells like.
OP
OP
hungry4hops
Hop to it!
Here's my test piece! I ran a piece of tape down the middle and used minwax conditioner on the top half. I also poked a hole on each side and used wood filler to see how that would look. I am definitely going to use conditioner on everything! I just need to pick up some polyurethane and put it on the test piece to see how it would look finished.
Hungry, I would almost use two coats on it. I have done that at tines with ponderosa which from your pics seems to be what you used. It's VERY unforgiving! It also will help you fill in and level out your heart woods to your soft woods.
Two coats of conditioner, a VERY light sand with 600 in between and you will be rewarded in the end. and I mean VERY light sanding, just enough to know down the dust nibs and create a positive "tooth".
Two coats of conditioner, a VERY light sand with 600 in between and you will be rewarded in the end. and I mean VERY light sanding, just enough to know down the dust nibs and create a positive "tooth".
OP
OP
hungry4hops
Hop to it!
Sorry its been a while since I updated! Finished up all the wood work today, got the arm rail glued and screwed. Just have to fill in some cracks with wood filler do some sanding and I should be all ready for stain!
OP
OP
hungry4hops
Hop to it!
I was hesitant to post this, don't laugh. Im not really a wood worker but when I test fitted the arm rail there was a 1/8 inch gap so I needed to put something in between the two 3/4 inch pieces of plywood. I browsed around the depot and lowes and couldn't find anything thin enough. Then I had a crazy idea to use toothpicks, went to the grocery store and bought 1000 for 1.80. Spread them out put down glue and assembled the top of the bar, perfect fit!
