Downsizing and revamping my brewing equipment for smaller batches and brewing inside. Make an offer on any item, will also consider bundling items for a better deal.
Will consider meeting half way or delivery within reasonable distance. Also could consider trades under same circumstances. Would ship if buyer pays cost & may consider adjusting price to make it work, depending on the offer/costs. I'm willing to work with you!
The large kettles are shown in the pics without fittings & valves but will come with these items as listed below.
$100 - Keggle- comes with 3 piece stainless ball valve & dip tube (shown unattached in separate pics); Keggle has one welded 1/2" NPT x1/2" NPT bulk head and drilled for another 1/2" weldless bulk head intended for thermometer/sight glass (not included).
$75 - 15 gallon stainless steel kettle with lid- drilled for ½” weldless bulk head, comes with brass ball valve
$75 - March pump Model 809 with polysulphone head- comes with waterproof inline switch and mounted
$40- 9 gallon stainless steel kettle- comes with 1/2" MIP stainless bulkhead (not attached in pic). This is a heavy duty kettle with thick reinforced bottom. For $10 more I'll throw in a stainless 3 piece ball valve.
$60- 10 gal Igloo cooler converted mash tun with stainless tube screen- minimal use
$55- Shirron 10 plate chiller- well used but well cleaned. Has built in 1/2" FIP and garden hose connections. Will chill wort from boiling to 80 degrees in 12 minutes.
$35- generic 10 plate chiller- used once and well cleaned. Has 1/2" barb connections. Performs nearly as well as the Shirron
$30 each- 20 qt stainless steel kettles- drilled for & included ½” weldless bulk head, 1/4" sight glass and 1/4"dial thermometer attachment (shown mostly intact in the pics)
$20- 3/8" copper tubing immersion chiller-brass compression garden hose fittings- basic Northern Brewer model from 8 years ago
$10- 1/2" homemade copper immersion chiller- soldered brass garden hose connections- fits inside a 20 qt kettle but mostly is useful as a pre-chiller to sit in a cooler of ice.
Will consider trades for most anything potentially useful but am specifically looking for the following:
Homebrew equipment (advanced level) as well as equipment for other fermentation related hobbies
a. Specifically- corny kegs, stainless steel fermenters, counter flow chillers, stir plate, beakers/glassware, different types of hydrometers or refractometers, etc
2. Tools (mostly wood working or general shop power tools, but also would consider good quality hand tools like wrenches, socket sets, & others)
a. Specifically- fixed base corded router, compound miter saw.
Will consider meeting half way or delivery within reasonable distance. Also could consider trades under same circumstances. Would ship if buyer pays cost & may consider adjusting price to make it work, depending on the offer/costs. I'm willing to work with you!
The large kettles are shown in the pics without fittings & valves but will come with these items as listed below.
$100 - Keggle- comes with 3 piece stainless ball valve & dip tube (shown unattached in separate pics); Keggle has one welded 1/2" NPT x1/2" NPT bulk head and drilled for another 1/2" weldless bulk head intended for thermometer/sight glass (not included).
$75 - 15 gallon stainless steel kettle with lid- drilled for ½” weldless bulk head, comes with brass ball valve
$75 - March pump Model 809 with polysulphone head- comes with waterproof inline switch and mounted
$40- 9 gallon stainless steel kettle- comes with 1/2" MIP stainless bulkhead (not attached in pic). This is a heavy duty kettle with thick reinforced bottom. For $10 more I'll throw in a stainless 3 piece ball valve.
$60- 10 gal Igloo cooler converted mash tun with stainless tube screen- minimal use
$55- Shirron 10 plate chiller- well used but well cleaned. Has built in 1/2" FIP and garden hose connections. Will chill wort from boiling to 80 degrees in 12 minutes.
$35- generic 10 plate chiller- used once and well cleaned. Has 1/2" barb connections. Performs nearly as well as the Shirron
$30 each- 20 qt stainless steel kettles- drilled for & included ½” weldless bulk head, 1/4" sight glass and 1/4"dial thermometer attachment (shown mostly intact in the pics)
$20- 3/8" copper tubing immersion chiller-brass compression garden hose fittings- basic Northern Brewer model from 8 years ago
$10- 1/2" homemade copper immersion chiller- soldered brass garden hose connections- fits inside a 20 qt kettle but mostly is useful as a pre-chiller to sit in a cooler of ice.
Will consider trades for most anything potentially useful but am specifically looking for the following:
Homebrew equipment (advanced level) as well as equipment for other fermentation related hobbies
a. Specifically- corny kegs, stainless steel fermenters, counter flow chillers, stir plate, beakers/glassware, different types of hydrometers or refractometers, etc
2. Tools (mostly wood working or general shop power tools, but also would consider good quality hand tools like wrenches, socket sets, & others)
a. Specifically- fixed base corded router, compound miter saw.
