Manifold Question

[chefchris]

My freezer's almost done. Should have the collar pieced together tonight. I have some questions about air distributors. I have the space for 6 kegs in my freezer so I started looking for 6 way manifolds. I remember seeing a thread on here where someone had "T" off of gas line or manifold (can't remember). So could I just buy a 3 way manifold and insert 3 T's into the outputs?

 

[EdWort]

I use a stainless cross for my 3 tap kegerator and I have an 8 way manifold in my carbing freezer in the garage. Both work great, but make sure you have a checkvalve in the system to prevent back flow.

 

[david_42]

Certainly, but put a check valve in each line. Otherwise you stand a good chance of mixing beers when you hook them up.

 

[Brewin_CRAZY]

There are lots of ways to do it, I just built my own manifold out of SS T's as opposed to buying one. You then have the option to add, remove, mess with all that fun stuff. Its nice to be able to just add a source, or a valve and gauge so you can have different pressures going to different kegs. Not all beers necessarily pour at the same pressure, doesnt really matter though.