justfun29860
New Member
- Joined
- May 9, 2014
- Messages
- 1
- Reaction score
- 2
I built a tower cooler with a 12 volt cpu fan [a computer cooling fan..available at radio shack], a 1/2 inch plyable/flexable clear tubing 3-4'' long [available at lowes ] a 12volt used cell phone charger [look in your junk drawer, you might have 3 or 4 of them !] 3' of speaker wire and a 4" funnel.....i mounted the fan to the funnel [ be sure the fan is in the right flow direction], then soldered the output wires from the phone charger to the fan wires, then soldered speaker wire to the phone charger "plug in wall " terminals, then jumped the speaker wires to the thermostat control ! NOTE; BE SURE TO PUT HEAT SHRINK TUBE OR ELECTRICAL TAPE AROUND YOUR SOLDERED CONNECTIONS !!!..then feed the hose up the tower and have the fan hang about 2" off the kegerator interior floor.the whole project took about an hour ! [did not cost me anything, i had this stuff lying around the shop!]..now the tower stays cool and no more foaming on my awesome tasting keg of blue moon !!!...CHEERS...