FlyingDutchman
Well-Known Member
- Joined
- Feb 27, 2012
- Messages
- 53
- Reaction score
- 4
I purchased a CM Becker in line flow control unit so I would not need 500 feet (or so) of line on my 30 psi soda keg. It can be a real pain trying to manage all that hose inside my small 7 cu. ft keezer.
When I got it, I stuck it in the middle of a 4 foot line and fiddled with the adjustment screw until I got a 10 second pint. It worked great for a day, but then it started sputtering and pouring rather flat glasses. There seems to be quite a bit of turbulence in the flow control unit and I am wondering if this could be the cause of my losing carbonation.
Is there something I am doing wrong with this? Should it be closer to one end of the line or something like that? Cone direction?
Does anyone have any experience with these?
Thanks,
When I got it, I stuck it in the middle of a 4 foot line and fiddled with the adjustment screw until I got a 10 second pint. It worked great for a day, but then it started sputtering and pouring rather flat glasses. There seems to be quite a bit of turbulence in the flow control unit and I am wondering if this could be the cause of my losing carbonation.
Is there something I am doing wrong with this? Should it be closer to one end of the line or something like that? Cone direction?
Does anyone have any experience with these?
Thanks,