williamcoates2002
New Member
- Joined
- Apr 24, 2023
- Messages
- 1
- Reaction score
- 0
Hi,
Building a chiller using a window ac unit. Everything done except wiring. I stripped all the digital components out and will use an inkbird to regulate the temp. I'm stuck with the wiring of the condenser fan. It has 6 wires. Gray wire goes to the capacitor. The white, orange and red are the speed wires with red being the highest i believe. This part is fine. I'm not sure what the blue wire should be connected too. It was going to the control panel I removed. I included the schematic from the unit and the motor. Any help greatly appreciated.
Building a chiller using a window ac unit. Everything done except wiring. I stripped all the digital components out and will use an inkbird to regulate the temp. I'm stuck with the wiring of the condenser fan. It has 6 wires. Gray wire goes to the capacitor. The white, orange and red are the speed wires with red being the highest i believe. This part is fine. I'm not sure what the blue wire should be connected too. It was going to the control panel I removed. I included the schematic from the unit and the motor. Any help greatly appreciated.
