TheLiquidBakery
Active Member
- Joined
- Apr 7, 2014
- Messages
- 41
- Reaction score
- 5
I am selling my electric brewery control panel build that I recently finished.
The control panel was designed and assembled by me. The specifications of the box are as follows.
Here are a few pictures:
Front:
Bottom:
Inside Door:
Inside Panel:
Power Cord:
Temperature Probe Cables:
30A Twist Lock Plugs:
Temperature Probes:
A little background on myself I am a senior electrical engineering student obtaining my bachelors and I have also been working as an electrical designer in the field of commercial buildings for 7 years. I have thoroughly checked over the design & build and all is correct per theelectricbrewery.com and Auber Instruments Installation manuals. The control panel has not been tested for I do not have a NEMA 14-30 receptacle in my home. It has been checked for continuity at the switches and for 0 resistance at the grounds. Power in and element receptacles are locking plugs for added security. The only thing I have left to do is re-attach the grounding post to the door since it came detached during the final assembly. This will welded back to the door prior to sale. This control panel by no means is perfect. This is my first attempt at building one of these and most of it was done with hand tools. I will not bargain over the forum. Please PM me offers. I will answer questions about the control panel over the forum so feel free to do so.
Price: $1250 obo
Thank you for taking the time to look at my control panel and happy brewing. Cheers!
The control panel was designed and assembled by me. The specifications of the box are as follows.
- Auber switches, indicator lights and alarm
- (1) Auber Instruments 400x300x200 (mm) enclosure
- (2) Auber 40A Solid State Relays
- (1) Auber 75A heat sink
- (3) Auber SYL-2352 PID temperature controller
- (3) Auber deluxe RTD probe cables(8 ft)
- (2) Liquid tight 2" RTD probes (HLT and Boil)
- (1) Liquid tight 4" RTD probe (Mash)
- (1) Auber JSL-73A Timer
- (2) Blue Sea Systems Bus bars rated at 130A
- (1) 20A in-line fuse (for protecting the 14AWG wire off the hot bus)
- (3) 30A 240V Contactors w/ 120V coils.
- (1) Leviton NEMA L14-30 receptacle (power in)
- (2) Leviton NEMA L6-30 receptacles (Element power)
- (2) Leviton NEMA 5-15 receptacles (pump power)
- (1) Petra 30A power cord with L14-30 plug
- (2) L6-30 plugs (just the plug, no cord or element)Could use these to build an element power cord.
- Labels by Signs, Banners, and Tags.
Here are a few pictures:
Front:
Bottom:
Inside Door:
Inside Panel:
Power Cord:
Temperature Probe Cables:
30A Twist Lock Plugs:
Temperature Probes:
A little background on myself I am a senior electrical engineering student obtaining my bachelors and I have also been working as an electrical designer in the field of commercial buildings for 7 years. I have thoroughly checked over the design & build and all is correct per theelectricbrewery.com and Auber Instruments Installation manuals. The control panel has not been tested for I do not have a NEMA 14-30 receptacle in my home. It has been checked for continuity at the switches and for 0 resistance at the grounds. Power in and element receptacles are locking plugs for added security. The only thing I have left to do is re-attach the grounding post to the door since it came detached during the final assembly. This will welded back to the door prior to sale. This control panel by no means is perfect. This is my first attempt at building one of these and most of it was done with hand tools. I will not bargain over the forum. Please PM me offers. I will answer questions about the control panel over the forum so feel free to do so.
Price: $1250 obo
Thank you for taking the time to look at my control panel and happy brewing. Cheers!
