Fuzzymittenbrewing
Well-Known Member
- Joined
- Jun 22, 2013
- Messages
- 4,123
- Reaction score
- 1,268
Any og and fg readings to shoot for?? I plan on doing a batch this week
Ok been 17 days and stored it three times over that time. Air lock is STILL bubbling... Is that right? Is it because of the lemon and orange that are in there too? Do I need to worry about it?
OG was 1.042 ish... About 5% mark. Just took out the orange and lemon (I had cut into quarters), and took a reading of 1.000... Added ten more bags of tea cause it tasted good but tea wasn't overly strong... Am wanting to drink it a bit early... This weekend if possible (any issues with that anyone knows of?)... But air lock was still bubbling about once every two seconds when I did all this... Was that the fruit?
Cool... So it's in a primary brew bucket... Was thinking of racking off to another brew bucket and taking back to my parents house a few hours away so my bro and I can see how far we can get through in a weekend... Leaving fri night to do so.
U think it will be good if I rack it Thursday and roll? Wasn't planning to pasteurise... Just drink as is over ice.
Well... Did wonders... Sat night was hit! All this stuff needed was a few tea spoons of sugar to let it roll down the throat a lil easier... Killed 3 gallons in 1 night... Good times, good times.
Great recipe
OG was 1.042 ish... About 5% mark. Just took out the orange and lemon (I had cut into quarters), and took a reading of 1.000... Added ten more bags of tea cause it tasted good but tea wasn't overly strong... Am wanting to drink it a bit early... This weekend if possible (any issues with that anyone knows of?)... But air lock was still bubbling about once every two seconds when I did all this... Was that the fruit?
Just transferred my 2-ish gallon batch. Racked it over 2 crushed campden tabs & 1tsp sorbate.
Gonna let it sit for a week, then bottle with 4-5oz lemonade concentrate and bottle. How long is everyone letting theirs sit in bottles before consuming? Should I let it sit the standard two weeks, or is it ready right away? I don't particularly care if it ends up carbed, so long as it's tasty.
Yeah - although the OP originally formulated the recipe without, campden+sorbate have since been recommended to stabilize it, so I'm giving it a go. I might brew up another batch in a few days and forego 'em, just for sake of comparison.
I'm afraid I can't answer your fruit question, since I didn't use any. I read a few posts where others who were doing smaller batches like I am came out with heavier than desired fruit flavors when they followed that bit of the recipe, so I just didn't bother. I will say that for the first few days it was pretty aromatic - I'm primarily a beer brewer and Montrachet definitely has a different "stink" than the beer yeasts I've used have. Unless the fruit looks moldy or there's a pellicle or something on the surface, I wouldn't worry about it.
Also, from my experience so far with this batch Montrachet ferments differently than beer yeasts - it's much calmer, with a fizziness rather than a full-on churning type ferment that you'd expect out of a beer yeast. Much less kreusen too. So I wouldn't worry about not seeing much activity. If there's sugar, and the yeast is even somewhat fresh, it's fermenting.