• Please visit and share your knowledge at our sister communities:
  • If you have not, please join our official Homebrewing Facebook Group!

    Homebrewing Facebook Group

Clogged tube?

Homebrew Talk

Help Support Homebrew Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hsocain

Member
Joined
Jan 30, 2013
Messages
16
Reaction score
0
Just kegged a pale ale that is one of my favorites. After force carbing my beer I get only a small trickle out of my line. My other 2 kegs are dispensing fine. I wonder if there is a clog in my pick up tube or have I missed something else? Any suggestions for clearing this without spoiling the whole batch? Thanks.
 
One way would be to put a beer quick disconnect on your gas line, depressurize the balky keg and attach the black disconnect to the beer Out post, and use CO2 to clear the dip tube. Another way would be to depressurize the keg (if this is a ball lock keg with a manual PRV, latch it in the open position), then remove the Out post and dip tube and clean it out in the sink. Sanitize all parts before reinstalling and you'll be good until it clogs again.

Shut the gas off to the keg before performing either procedure, of course...

Cheers!
 

Latest posts

Back
Top