beverage line tubing

[jungdahl]

Is there a brand/supplier or type of 3/16 beverage tubing that produces less foam than others. I need it to be available in 40' or more length. It's for high carbonation.

 

[day_trippr]

Do you need 40' because of the distance from keg to faucet, or because you think you need the length to tame the beverage?

If the latter, consider dropping down to 4mm ID beer line, specifically EVABarrier tubing, as you could dramatically shorten the length needed to cope with a highly carbonated beverage...

Cheers!

 

[SourLover]

Morebeer has their EVA Barrier tubing. One size is 5mm ID x 8mm OD. The 5mm is pretty close to 3/16”. It is available in 39’ rolls. I actually just put some together on the gas side of my system about 10 minutes ago. It is simple to use and works great for me. I can’t say if it produces less foam than others, but I can say I have no problem dispensing beers at 3-3.5 volumes out of my kegerator with it.

 

[jungdahl]

Do you need 40' because of the distance from keg to faucet, or because you think you need the length to tame the beverage?

If the latter, consider dropping down to 4mm ID beer line, specifically EVABarrier tubing, as you could dramatically shorten the length needed to cope with a highly carbonated beverage...

Cheers!

Wonder if that will fit on a 1/4" barb?

 

[day_trippr]

It will, with the application of heat (hot water, hair dryer)...

Cheers!