ChrisfromAbby
Well-Known Member
A friend gave me some Sanke keg equipment. 
There are four keg connectors with lines for CO2 and beer, and a 3-way manifold. One line off the manifold splits into two lines. SS connectors are attached with hose clamps at the shank ends of the beer lines, crimps on the rest. Beer lines are about 10 feet long.
All the lines are the same and appear to be 3/8" food grade vinyl tubing.
Looking at that beer line length spread sheet, I would need between 70 and 80 feet of tubing! This can't be right... This was an operating system for a beer garden. Will I need to replace all the beer lines and connectors with 3/16" to make it work?
Chris
There are four keg connectors with lines for CO2 and beer, and a 3-way manifold. One line off the manifold splits into two lines. SS connectors are attached with hose clamps at the shank ends of the beer lines, crimps on the rest. Beer lines are about 10 feet long.
All the lines are the same and appear to be 3/8" food grade vinyl tubing.
Looking at that beer line length spread sheet, I would need between 70 and 80 feet of tubing! This can't be right... This was an operating system for a beer garden. Will I need to replace all the beer lines and connectors with 3/16" to make it work?
Chris
