BTFootball
New Member
- Joined
- Jul 2, 2018
- Messages
- 4
- Reaction score
- 1
So here's the kegerator I have: https://www.amazon.com/gp/product/B017HVSKRY/?tag=skimlinks_replacement-20
I've been having success with sparkling water and cider, but my first beer is giving me some problems. It worked out okay at first. Foam was a bit heavy, but that was likely a tower cooling issue that I'm working on.
Out of nowhere though, I've had this weird issue where liquid is barely coming through the tubes at all, just a dribble of foam. If you look at the tubing, you can see that it's mostly just whitish foam inside. The CO2 pressure is at 10 psi, and using the release valve demonstrates that the keg is carbonated, but the flow is still very flaccid.
Anyone else had this problem or know an obvious culprit?
I've been having success with sparkling water and cider, but my first beer is giving me some problems. It worked out okay at first. Foam was a bit heavy, but that was likely a tower cooling issue that I'm working on.
Out of nowhere though, I've had this weird issue where liquid is barely coming through the tubes at all, just a dribble of foam. If you look at the tubing, you can see that it's mostly just whitish foam inside. The CO2 pressure is at 10 psi, and using the release valve demonstrates that the keg is carbonated, but the flow is still very flaccid.
Anyone else had this problem or know an obvious culprit?
Last edited by a moderator: