Anyone have a dedicated whirlpool tank?

[JKoravos]

Since I have gone to an electric kettle and IC (from propane+CFC), the whirlpooling really doesn't work. There's too much stuff in there breaking up the flow pattern. I could pull out the IC after it's chilled, but I would think the element is still going to have an effect on the whirlpooling collection efficiency.

That being the case, I'm considering a stand alone whirlpool tank. Anyone done it?

 

[JKoravos]

Hmmm, I guess not. Apparently, I'm just crazy.

 

[drez77]

I pull my IC out and still whilrpool with my element in there. I have not noticed that much of an issue. Although the little giant pump I am usung gets a pretty good whirpool to me. The thought of a seperate vessel would be nice but would be one more thing to clean and buy.

 

[jpc]

Hmmm, I guess not. Apparently, I'm just crazy.

No, not crazy, I don't think (at least, not from the evidence in this thread).

My issue with this is that it would be yet another piece of equipment to store. I'm limited on space as it is, so if a piece of equipment can do double-duty, it does.

 

[bendavanza]

Two things:
1:Maximize the whirlpool action in your kettle, making sure you have minimal restrictions in the lines with minimum line length and rise, and place some restriction at the return end for velocity.
2:Stainless paint mixer on a drill. EDIT: http://www.jiffymixer.com/

 

[uncia]

I've thought about it but more from the standpoint of quicker turn around before the next batch (for multi batch days).

 

[ClaudiusB]

Originally Posted by JKoravos
I'm considering a stand alone whirlpool tank. Anyone done it?

Yes

Hmmm, I guess not. Apparently, I'm just crazy.

I must be too

My tank

Cheers,
ClaudiusB

 

[Jethro]

Two things:
1:Maximize the whirlpool action in your kettle, making sure you have minimal restrictions in the lines with minimum line length and rise, and place some restriction at the return end for velocity.
2:Stainless paint mixer on a drill. EDIT: http://www.jiffymixer.com/

I like this option myself. Anyone using one of these mixers and what size works?
It would work for mixing a mash and for whirpooling I hope.

 

[bendavanza]

I've read in other threads the PS1 is good for 5-10g batches. It should be good for both mash and whirlpool. Note the max 800rpm.

 

[Maltose]

I've got three keggles: HLT-MLT-BK. Claudius do you have any info on how to install a side port like yours? I'd be interested in maybe just making my MLT serve as a WP after the boil. Would there be any problems with this?

 

[ClaudiusB]

I've got three keggles: HLT-MLT-BK. Claudius do you have any info on how to install a side port like yours?

Maltose as you can see in the picture the fabricator made a cutout and welded the inlet pipe assembly in place.

I'd be interested in maybe just making my MLT serve as a WP after the boil. Would there be any problems with this?

No, as long you remove the false bottom if installed.

Cheers,
Claudiusb

 

[Maltose]

thanks claudius, looks good