Anybody using this Tower?

[bh10]

Im building a home bar and am looking to a tower has anybody used this one, if so thoughts?
Its the BT-4-SSR shown, it comes with 72", 1/4" shanks with 3/16 restriction lines, would this work with a corny keg setup?

http://www.glastender.com/PDF/5_04.pdf

 

[ZWood15]

Should work just fine for a corny setup. Where are your kegs going to be in relation to the tower? Mounting it on top of a fridge or running beer lines from somewhere else?

 

[bh10]

Mounting it on top of a keezer, so directly above it.

 

[cruelkix]

Im building a home bar and am looking to a tower has anybody used this one, if so thoughts?
Its the BT-4-SSR shown, it comes with 72", 1/4" shanks with 3/16 restriction lines, would this work with a corny keg setup?

http://www.glastender.com/PDF/5_04.pdf

Looks nice (and pricey!). Should work just fine for a corney set up. You will probably end up having to swap the connections off at the end of the beer lines and really you are going to want longer lines anyway. All they are going to give you is like 5 feet. (or no lines/connections at all depending....)