A 'cleaning the beer line' question

[Pointyskull]

I use this to clean my lines, and the connection on the pump works great because I can take the beer line off of the keg coupler and screw it directly to:
https://www.beveragefactory.com/draftbeer/cleaning-equipment/kegco_pck_pressurized_cleaning_kit.html
Is there a piece I can connect that will allow me to connect a ball lock (helpful on the homebrew/corny lines that don't use a D coupler)

 

[Deadalus]

If you don't find what you are asking for, I can suggest a different solution.

Cut the pump line and add a quick disconnect in that line. Keep the female side on the pump line. On the coupler side, add the male quick disconnect x barb fitting. Then if you size the barb and quick disconnect properly, you can connect this adapter (ball lock post to male quick disconnect) to attach to your ball lock (female) post connector. Then you can just switch out as needed.

 

[KeggleBrewer]

If you are still looking for an easier beer line cleaning method. This will let you clean all your lines at the same time. Home Brewing Beer Line Cleaning – Keggle Brewing