Mine came Friday, all 4 had static lids and 3 had pressure. I don't have any pin lock gas connects to test the non pressurized one yet. All had sprite or coke residue and a few were banged up but will work fine.
4 Pin Lock Kegs = $99
- Thread starter stu4stew
- Start date
Help Support Homebrew Talk:
amandabab
Well-Known Member
the second four were rebuildable but in worse shape. none were holding pressure (one didn't even have a lid gasket)
rootbeer/coke/sprite/mystery gunk.
2 static lids/2 manual. statics are throw-aways, manuals needed feet and valve cores.
3 firestone are holding gas, one cornelius that I don't have conversion posts for.
so end result is $270, 5 hours work, a COMPLETLY empty spare parts box, 7 working kegs, 1 highly probable keg.
rootbeer/coke/sprite/mystery gunk.
2 static lids/2 manual. statics are throw-aways, manuals needed feet and valve cores.
3 firestone are holding gas, one cornelius that I don't have conversion posts for.
so end result is $270, 5 hours work, a COMPLETLY empty spare parts box, 7 working kegs, 1 highly probable keg.
deadfall
Well-Known Member
Well when I got home my 4 kegs were here. A quick inspection showed that all 4 had pressure releases. They look like there in good shape. Only one has a small dent where the lid sits. It had some pressure in it, so I hope its good. A good friend of mine gave me a CO2 cylinder over the weekend. So hope fully soon I'll have something on tap. Thanks to the Op for pointing this deal out.
Got mine, just opened them and all 4 were manual pressure relief, all 4 holding tons of pressure!
