Hey Everyone, a hard moment but up for sale is my 220v all electric brewing and kegging setup. With 2 kids and having just moved, its time to downsize. This has been a great system, super easy to use and makes brewing a joy.
So Lets start with the table, its a stainless prep table with wheels. Built a custom water and chiller system to it. Water flows through a filter and you can manipulate the valves to move it into the HLT. BK or run through the chiller. *Note* did have a freezing issue and had to cut a small section out, you would need to solder in a new piece.
The brains of the system are the 30 Amp electric control panel. It was professionally built and only used the best parts. Auber PID, timer and internals. It has switches so you can control the March pump, or any aux electrics you may need. Has a timer with alarm. Included is a GFCI breaker that you can use with a spa panel for hookup.
That panel controls the two 5500w heating elements. Built with Brewers Hardware components and fit into the kegs with tri clamps.
HLT and BK are converted kegs with welded tri clamp fittings. HLT has a temperature probe ( which feeds into the panel) and a sight glass fitting.
Next is mash tun. Converted cooler with screen. All the pieces have stainless quick connects. Also included is a march pump and high temp hoses with quick connects
Also will include
1 Ball lock, 1 standard 5 gallon keg, multiple tap handles, multiple manual pumps. Cool plate with everything needed to build a jockey box.
Johnson Controls temp controller for turning a fridge/freezer into a fermentation chamber
All in all this is an awesome system, so many great parts' i'm sure I missed some but check out the pictures
Located near Princeton NJ
Asking $1400 for the entire system, will include everything brewing related I have. Only willing to separate large systems ( all the electric brewing / All the kegging) But willing to talk and negotiate.
More pictures here http://imgur.com/a/YMu4x
So Lets start with the table, its a stainless prep table with wheels. Built a custom water and chiller system to it. Water flows through a filter and you can manipulate the valves to move it into the HLT. BK or run through the chiller. *Note* did have a freezing issue and had to cut a small section out, you would need to solder in a new piece.
The brains of the system are the 30 Amp electric control panel. It was professionally built and only used the best parts. Auber PID, timer and internals. It has switches so you can control the March pump, or any aux electrics you may need. Has a timer with alarm. Included is a GFCI breaker that you can use with a spa panel for hookup.
That panel controls the two 5500w heating elements. Built with Brewers Hardware components and fit into the kegs with tri clamps.
HLT and BK are converted kegs with welded tri clamp fittings. HLT has a temperature probe ( which feeds into the panel) and a sight glass fitting.
Next is mash tun. Converted cooler with screen. All the pieces have stainless quick connects. Also included is a march pump and high temp hoses with quick connects
Also will include
1 Ball lock, 1 standard 5 gallon keg, multiple tap handles, multiple manual pumps. Cool plate with everything needed to build a jockey box.
Johnson Controls temp controller for turning a fridge/freezer into a fermentation chamber
All in all this is an awesome system, so many great parts' i'm sure I missed some but check out the pictures
Located near Princeton NJ
Asking $1400 for the entire system, will include everything brewing related I have. Only willing to separate large systems ( all the electric brewing / All the kegging) But willing to talk and negotiate.
More pictures here http://imgur.com/a/YMu4x
