Indiana 1 BBL Turn Key Brewery with Fermenter $8,000

[Hoosierbilly]

I am selling my 1BBL turn key brewery. I down graded from 2bbl to 1bbl but I find it sits around more than it is brewed on. I have brewed maybe 10 batches with this setup. I have had this setup for about 2-3 years now. Not my first set of stainless vessel, very well cared for. No dents, nicks, scratches, or discoloration. Cleaned with BKF and stored inside. I get efficiency in the low 80's. I find myself doing more smaller batches and would like to see this put to use in a brewery where it belongs. Before this I had a 2bbl gas fired setup that I ended up selling to a brewery in Detroit within 24 hours of being posted. This includes every single part and piece needed to brew. Uses a 50 amp 4-prong outlet. The control panel is the electric brewery 50amp control panel for 30+ gallons that was pre-asymbled by them, with their control panel power cord.
https://shop.theelectricbrewery.com...ry-control-panel-for-30-gallons-pre-assembled
https://shop.theelectricbrewery.com...ts/control-panel-power-cord-50a-pre-assembled
The vessels are stout tanks:
40gal HLT
https://conical-fermenter.com/40-Ga...rmowell-Thermometer-Sight-Glass-and-Legs.html
40gal MT and 12" sparge arm
https://conical-fermenter.com/MT40TW-RF3-BO-Legs.html
45gal BK
https://conical-fermenter.com/45-Ga...et-Sight-Glass-Electrical-Ports-and-legs.html
The control panel connects to 4 5500w all stainless elements (two in HLT and two in BK) with grounded TC connections. Two twist lock cords go to power the two DC pumps.
https://www.brewhardware.com/product_p/element5500.htm
https://www.brewhardware.com/product_p/etc3.htm
https://www.northernbrewer.com/collections/pumps/products/the-steelhead-2-pump
Each vessel has a TC temp sensor with color coded cables to the control panel (Red for mash, white for water, blue for boil.)
https://shop.theelectricbrewery.com...p-tri-clamp-1-5-flange-1-38-35mm-probe-length
https://shop.theelectricbrewery.com...roducts/temperature-probe-cable-pre-assembled
For recirculating, whirlpooing, and cooling in the BK is a march nanobrewery pump and chillzilla.
https://woodyshomebrew.com/products...MIgefMgcOv3QIVg7rACh0C4AUCEAQYAyABEgJQUvD_BwE
http://shop.greatfermentations.com/product/chillzilla/wort-chillers
SSbrewtech 1bbl chronical brewmaster edition with cooling coil and neoprene sleeve
https://www.ssbrewtech.com/collections/chronicle-bme/products/chronical-one-barrel-fermenter
Included is all silicone hoses, hose clamps, triclamps, gaskets, and any and all fittings needed for brewing. Oxygenation is with an oxygen wand which is included as well. No plastic or pvc touches the wort, only stainless and silicone.
I have over $10,000 in everything. Asking $8,000 firm. Located in central IN, local pickup only.

 

[Hoosierbilly]

bump

 

[NCBeerMedic]

Bump for a nice setup

 

[Hoosierbilly]

Bump

 

[Hoosierbilly]

Bump

 

[JBow]

Hi,
Can you please send me your contact information? I am interested.

Thanks!

 

[Hoosierbilly]

The link for the HLT has changed, this is the correct link.
https://conical-fermenter.com/40-Gallon-Hot-Liquor-Tank-sight-glass-HERMS-Coil.html

 

[Hoosierbilly]

bump

 

[Hoosierbilly]

Bump

 

[AkTom]

Way too big for me. But... I’ll bumpdiggitty, bumpdoggitty for you.

 

[shaky6]

MT link no good. Does it have a clean-out hatch?

 

[Hoosierbilly]

No cleanout hatch. It's the same as this one but without the mounting bars between the legs

https://conical-fermenter.com/1-bbl-Mash-Tun-486.html

 

[Hoosierbilly]

Bump

 

[Hoosierbilly]

Bump

 

[madbiker]

Are you really still trying to sell this 2 years later? What is wrong with it

 

[Hoosierbilly]

Are you really still trying to sell this 2 years later? What is wrong with it

Nothing, I just don't feel like paying $100 to post it to probrewer for a month or a week or whatever it is. In no rush to sell it

 

[BrentJ]

I can vouch for the condition of this Seller’s gear as I bought some earlier this Summer. Dude takes great care of his stuff. Wish I needed something this big....

 

[Hoosierbilly]

I can vouch for the condition of this Seller’s gear as I bought some earlier this Summer. Dude takes great care of his stuff. Wish I needed something this big....

Thanks Brent, glad you're enjoying the new gear!

Any legit questions madbiker?

 

[Hoosierbilly]

Bump