Keezer temp ?
- Thread starter pickles
- Start date
Help Support Homebrew Talk - Beer, Wine, Mead, & Cider Brewing Discussion Forum:
EdWort
Well-Known Member
You want a controller of some kind. I use a Digital one from Love Controls.
Get a heavy duty extension cord and wire it this way and you are good to go.
Get a heavy duty extension cord and wire it this way and you are good to go.
nostalgia
Well-Known Member
I am reading these diagrams correctly, in that the hot lead is attached to the Normally Connected side of the relay?
I just wired mine up as shown, and when I first plug it in the compressor runs for a second then the relay opens. The controller is reading the correct temp (75) and I've got SP set at 65. I checked d0 and it is set to Co.
Thanks for any help,
-Joe
I just wired mine up as shown, and when I first plug it in the compressor runs for a second then the relay opens. The controller is reading the correct temp (75) and I've got SP set at 65. I checked d0 and it is set to Co.
Thanks for any help,
-Joe
