Search results

Any further thoughts after using a few more times? These conicals seem to be a great value without compromising quality. I'm interested in getting one.

I calculate 1.5 oz of dextrose is needed to get you in the middle of the carb range for an IPA. This is from Tastybrew.com. This is if you have a 2.5 gallon batch and bottle it at 72F. Don't worry about bring the beer back up to temp in regards to your cold crash. It will still have served...

I would let it come back up to room temp for a couple days 60-68F. This will make your calculation much easier but more importantly the yeast that will be using the priming sugar will be able to carbonate in a reasonable time. Once it is in the bottles you are to leave it at room temp to allow...

Yeah see how it goes. You could always use a couple different bottle caps to see if those bottles have any more or less carbonation compared to the ones you are questioning. Let us know what happens.

I wouldn't be afraid to add more yeast and then recap them. This should not lead to bottle bombs. This scenario is created when you either bottle prior to the yeast finishing fermentation or if a wild yeast starts to take hold and metabolize sugars that your brewing yeast wouldn't normally...

Here are the pics I promised. Sorry most of them are sideways, I'm not sure how to change that as this app insists on loading them that way. Anyways, in the pics you can see the return line I added to reduce the flow rate to the riser. I haven't found that I need it for this reason, however, I...

I did get a pump. I bought the clean water pump from Harbor freight that I linked to earlier. I decided to go with it because it's 1/3 hp and according to the specs does Not contain oil in the housing like most the others. I have washed about 4 cornies and 1 sanke without a problem yet. I'll...

Nice work. Looks like it is working great.

I think this calls for a picture. I'm always interested in beer porn.

I would say 1/4 to half a packet would be plenty for a 50 bottle batch. It just might be hard to estimate this when doing it.

An esb is pretty straight forward to brew. That would be a good starting point.

Yeah it is oxidation. I normally just try to rinse mine off in star san while brewing but ultimately I'm not too picky about how it looks when I dunk it in the wort.

Sweet action! Fire it up! Out of curiosity, why did you decide on a dual electric/gas system?

Most likely the gelatin did its job and pulled the yeast out of suspension and out of your beer. Therefore, there is not a sufficient amount of yeast cells to carbonate the beer in a reasonable time. I have used gelatin but I only keg so I can cheat when it comes time to carbonate. It sounds...

Good to know I guess. I remember reading of a HBT member who was considering or actually was using starsan to sanitize equipment he had for his dog kennel. It's always nice to extrapolate the information you learn from this hobby into other areas of life.

I agree with the above. Start with Palmer's book. It's a great introduction to brewing and gives you the building blocks to get wherever you want to go. To be honest you would get overwhelmed browsing through this site or the internet to try to find the basics to brewing your first batch...

Let us know how the air exchange works out, I am interested. I dry fitted my pump/cleaner last night. I used a combination of pvc and copper with the copper being used for the riser to minimize a build of fluid in the Sankes. In addition I also put a line in that returns directly to the...

I guess I haven't seen too many reports of pumps being too powerful and getting ahead of themselves but that makes sense. I wonder if it would help running a second hollow tube up parallel with the supply riser to allow air in and allow the water to flow out faster. Or running a portion of the...

The superior pump from Amazon I know has oil in it. It states this in the product video linked on Amazon. I did happen to find a 1/3 hp pump on Harbor freight site (see link below) that states in the description that it is Oiless which makes me assume that all the others that don't state...

For my scenario I couldn't justify the cost of the stainless elements. I went with a regular Camco 5500w element and used silicone chaulking on it to seal the face. I tried to be very diligent with it. It seems to be holding well as of now. In the end I figured if this idea failed at least I...