Search results

That bend radius is definitely better than the ultra... Looks like it should be substantially easier.

The choker is a possibility and I actually already have that going on now with the BevSeal tubing. I am hoping the EVA is flexible enough to eliminate the vinyl shown below (but I doubt it). The pictures are from before I 100% finished so there is no drip tray or handles but, you can tell how...

Unfortunately I don't have a way to get it up the wall without taking the existing system all apart (nightmare) but it occurred to me that I do have a 14 ft A-Frame ladder, an extra CO2 Tank/Regulator/Tap, and a keg full of a failed batch of lager I need to dump. So I threw the keg back in the...

I guess I am convinced I have to use the 6 mm tubing. I really hope it works out better than the Bev Seal Ultra, Don't want to end up with 100's of extra feet of tubing coiled up. Right now with my 4 taps I have about 140 feet of tube coiled up in the Keezer and its just a pain. Also hoping to...

Yeah - that is actually exactly why I want to stick to the 4/5 mm if possible. Not only are the different but the options for the 6 mm are limited (at least from morebeer.com)

I have not purchased any of it yet but here it is https://www.morebeer.com/products/eva-barrier-double-wall-tubing-1564-6-mm-id-38-95-od-placeholder.html

Has anyone used the EVA Barrier in a long draw system? My Keezer is in the basement directly below my taps. From the center of a keg to the tap is about an 11 ft rise with another 3 or 4 horizontal feet needed to get from the keg out of the Keezer. I did my current setup about 6 months ago with...

Thanks all for the replies... Turns out I got a new Brewzilla (RoboBrew) for Christmas (I love my wife :yes:)... Gonna give this a shot in just a few hours. Will post back my results and what I finally landed on. Really appreciate it

First off thanks to you both for the feedback!!! I realize reading this that you are right. I am getting 5.5(ish) abv which you are right really falls out of the session range. I think I started with a session recipe a long time ago and have kicked it up over time and just never renamed it. So...

After brewing quite a few extract beers I am now going to jump into the All Grain pool. I have a recipe for an Amarillo Session IPA that I have made (and really like) many times. I am thinking it would be a good learning experience to try and convert that to All Grain so I have something to...

Thanks to everyone - I ordered two of the intertaps... Like i said, wish I had asked sooner. Will report back with a comparison between the Perlick and them once I have put a few thru them. :yes:

From the pics on amazon that Intertap Flow Control faucet looks almost just like the perlick 690ss. Can anyone confirm it really looks similar in person? I really like the idea of keeping the taps all looking the same but being able add the stout faucet on later. Wish I had asked the question...

Thanks - is the design of this faucet such that it will not get stuck like the inexpensive normal ones do?

Finishing up my keezer build in the next week or so (long draw so its a big project) and I am looking for some advice on a Stout Faucet. I currently have 3 Perlick 650ss faucets and I want my 4th to be a stout faucet. Anyone know if that Perlick 690ss is good for that? I like the idea of all...

Thanks so much for all the good info and links - Very much appreciated

I assumed the stuff in the line would not last forever but putting the freezer in the basement is the only "Wife Approved" design I have come up with. Guess it just means I have to have a beer every night. :) Thanks for the links. Looks like Chi Company has everything. Thinking I will get 18ft...

Thanks for the replies... Seems like I have to do the 1/4 as my total footage for the run is about 14/15 feet. If I use the choker line that should go on the inside of the freezer in a coil, not at the tap end correct? Off to work but I will check out that link here in a bit. If anyone else...

Hoping for some advice on my keezer build. I am putting the freezer in the basement and mounting the taps upstairs in the kitchen. Already read a ton on this and think I am going to circulate glycol with a pond pump to keep the lines cool. According to everything I read I will need to step up to...