Search results

Here is the last three days of a test brew - a nice IPA

SS Brewtech claims about 6 amps on the 12v heat pad... I haven't done a direct test myself.

Thanks, I will keep you all updated as I refine the product.

Hello all, I would like to introduce a system that I have been working on to get any comments / questions from this forum. I started this project after attempting to make a brewpi-remix system work for my needs with limited success. The problem that I ran into with the brewpi-remix was mainly...

Thanks, if there is anything I can do to help and not make it worse I will be happy to.

thank you Lee, for your input. I believe that I can make the system work in a "fridge constant" mode. For my desired outcome... I am sure minor issues to follow. Is there a way to change the monikers "beer", "fridge" on the LCD / web UI Display? I can certainly just know that the "Fridge"...

Changing the Fridge Constant to 38 F did cause the cooling to come on: putting the Beer temp probe into the same temp water bath, to simulate beer reaching the set temp causes this: I presume that this has to do with overshoot estimates... I will make some changes to those numbers. It would...

I have just made the changes you requested I believe. Still no call for cooling... In my test setup I now have the following: temp sensor device 0 "beer temp" - currently in ambient air for my test temp sensor device 1 "chamber temp" - currently in ice water for my test System set to Fridge...

I have played with a couple of scenarios... without much success. Here is the graph of the last day or so... as you can see I can get some cooling to happen but certainly not how I would expect it to work. I currently have the second temp sensor back to "room" rather than chamber. I only...

Ok, I changed the "room" temp device to "chamber temp" and I had cooling for a second... but, as you can see here... while the device list reads: I do not get cooling when the beer set point goes below the 50 degree I have set on the beer constant.

my sdtout.txt http://paste.debian.net/1103089/ my sdterr.txt http://paste.debian.net/1103090/ Thank you for your assistance....

Sorry no additional logs yet... But I did try changing it to chamber mode... Same result.

No problem, it's always nice to have people willing to take a look at issues and try to help.

Yes that is true, I am using a new "alpha" glycol firmware as discussed earlier in this thread. This configuration is appropriate for that seanario.

Best I can do with my phone quickly...

I woul be happy to... Working from my phone at the moment but I can vpn in... Is there a good way to do that from the interface or only ssh? If so can you explain, please pardon my ignorance.

The LCD is reading idleing The mode is beer constant.

not quite please see other reply

LBussy, thank you so much for your work on this... I am having an issue with the relay firing upon cooling call. I don't think the call for cooling is happening. I have successfully flashed my unit and updates my brewpi-remix. I have set the PID ( KP, KI, KD ) values to "0". I have the...

I have flashed my Uno manually now to modify the brewpi-remix settings... I had issues with the script not running until I performed the update command from my directory: pi@brewpi:/home/brewpi/ferm/utils $ sudo ./doUpdate.sh Once done and not flashing the controller at the end the script...