Search results

Is the BigTreeTech BTT PI a suitable alternative? https://www.amazon.com/BIGTREETECH-Control-Quad-Core-Raspberry-Pi-Printing/dp/B0C2KMT8V7/ref=mp_s_a_1_3?keywords=btt+pi&qid=1688530439&sr=8-3

Schulz Bräu Xul Abridged Just to name a few.

I have a few extra Mikmonken Version 2.1 iSpindel PCBs - iSpindle - DIY Electronic Hydrometer You will have to print a sled/drawer - I used this one - iSpindel/drawer/mwx-Edition at master · universam1/iSpindel

I haven’t brewed in over a year and a half and have now found some time to dive back in. Unfortunately, two+ weeks ago, I pulled my equipment off the storage racks in my garage and found some mouse droppings around my grain mill and on some of my other storage containers. Cleaning off the...

Thank you, I will take a look!

Hey all, It has been a while since I have brewed; I went to pull out my gear and found that a mouse got into my equipment and left little nuggets all over my Fermenator fittings and components. I pulled off all the o rings and washed everything on sanitize in the dishwasher (BEWARE - this will...

Yes, I was able to get it converted. I will take a few pics.

+1 Techniques in Home Winemaking

+10 gal Schwarzbier +10 gal Munich Helles =2,564 gal

I re-wired the unit to run off of an inkbird ITC-1000 110v model. The VR12 came equipped with a 12v transformer but I didn't to mess with that so I removed it. It was also low on R-134 so that got charged up. MT

+1, I actually used double sided tape on the end of the dowel to snap it back in. It takes a little patience. Good luck!👍

Double IPA

All I did was clear the flash (like in this thread) and uploaded the 6.2.0 firmware. Worked right out of the box. Sorry I can't be of more help.

I finally got it all running and the data is streaming to Brew-spy. I would really like to have the data streaming to Google Sheets. Is there an intermediate device/software that can take the iSpindel info and beam it to Google Sheets?

I typically add the flavoring to the keg and rack on top of it. Be sure to shake the keg or stir it gently to get it off the bottom. MT

Entered

Firmware 6.2.0 fixed this problem.

I think I might be switching gears here and hope to get some thoughts. I am proposing to remove the ems55advanced controller from the Imbera VR12 (similar to a True GDM-12) and replacing it with an Inkbird ITC-1000. Would it be acceptable to wire the Interior Fan Out and the Lights Out...

Hey All, Hoping I could get some advice. I came across some Visi-Coolers for sale, to use as a fermentation fridge for my conical, similar to Imbera VR12 (https://www.imberacooling.com/global/vr-12-2). The cooler I am looking at is equipped with an Elstat ems55advanced which controls the...