Search results

I have two light bulbs, just unscrew one if the temp get too warm. I also cover the carboy so no light gets in.

I was going to run my elecric this weekend for my rig. 50 amp gfci mounted in the circuit panel, 6 guage wire with ground and a neutral. I wanted to run my welder off of the same circiut, of course not at the same time I brew. My brother brought up the question if the welder would cause a...

It appears that the second keggle is sold. Will know tomorrow morning and make final post.

The tri clover ferule sticks into the keg about 1". A 3/4" stainless compression fitting attaches to it and the dip tube.

Tri clover fittings fit together with a gasket between them and held together by a clamp. The adaptors just go from tri clover to threads, in order to be able to screw in the heating element, hose barb on the output of the valve, and 1/4" pipe threads for the temperature sensor. The first...

One is sold, and one is still available.

Yes, the output of the valve has a tri clover to 1/2" female pipe thread adaptor.

the adaptor has 1' threads, so any element will screw in that has 1" threads which is most common.

I call these e keggles cadillac because they (qty 2) have all of the features in one that I like. First up they both have 3/4" 3 piece tri clover valves, one a red handle, one a blue. All of the fittings on the keg are welded tri clover ferules. 3/4" for the valves. The valves also have a...

Price on the Leland Tap a draft dropped to $100 plus shipping.

Everything was sold to the first person that sent a private message. Will let you know if it falls through.

Selling off some spare stuff that I have collected. I have 5 240v 45amp Gordos ssr's - $5 each. I have 3 240v 25amp opto22 ssr's - $5 each. I have 6 120v 25amp crydom ssr's - $5each. One 3 pole power distribution block. Run as big a line in as you want with 6 outputs for each pole. I used...

The inside dimensions of the towers are 11" flange to flange, 16" on center, and about 20" flange to flange outside dimensions. Also the estimated shipping is closer to $30, damn ups.

Yea, this is not a cheap chinese tower, I believe this one is an old school Micromatic model. Big bucks if purchased new.

I will post back in the morning with dimensions since I have to work tomorrow. I have a two column beveridge air kegorator myself. The spacing on these columns are just slightly wider than the two columns on mine. I was just going to move the columns out at the bottom of the tower because the...

It originally had a glycol line going up through it that was nothing more than a copper tube bent back and forth. I was going to use fans to cool it up through the towers.. I will post back tomorrow with the dimensions, the tower is currently at my work.

8 Tap Tower is sold. Next up is the Leland tap a draft. It has the great little Leland regulator mouted on a U.S. Sankey coupler with chrome faucet and black tap handle. It comes with two of the disposable cylinders. This is brand new in the box and sells for around $200 new. I am selling...

Most "aircraft" type aerosols will take the paint off of a keg. Spray it on, let it work for about 5 to 8 minutes. You will see the paint bubble off. Then wipe it off with a scotchbrite pad.

I have been saving caps for several years. This was my second attempt at mocking something up. My first image was just a geometrical design, but this time I tried something different. The size is about 24" by 36", and consist of about 730 caps. By mocking it up, it tells me what looks good...

My fan was also almost locked up, took apart and oiled the sleeve bearings was all it needed. It is actually hard to burn up one of these fans. Large 3 half barrel model - will get cold in 20 minutes.