Search results

I've done a couple all day mashes now and haven't had a single problem. the beer do tend to dry out a bit but that's all. I'm actually planning one now and I'm thinking of mashing @ 158 just to see what happens.

So my current setup is a 10 gallon Mash tun and 2 keggles for HLT and boil kettle. My brewing partners and I would like to make a monster stout soon and partigyle the batch. However with the Mash tun i'm only able to mash about 25 pounds of grain. So a little back story is that one of the brew...

awesome.. i kinda want to do that with our brand new one.. Maybe I can sample at Best Buy....

I'll be winning..

huh. theres a club that's meeting in Southfield. I may join you. welcome fellow Michigander.

I have a Smash in a converted pin lock and since it's been carbed, i've had this same problem. When it was first kegged and carbed I was still using picnic taps and opening the door, now however i have installed Perlicks and have completely switched over to 5 ' -3/16" beerline & 3/16" shanks...

hey LazyP have you had any problems with your lines inside the door being to close to the cooling unit. I've got my taps ordered and just wondering about the layout for the holes in the door. I'm afraid of having the lines to close and freezing up on me.

duh.. i didnt' even think of that. Thanks

Just got my Ebay bargain and I can't find anything to check it for accuracy. I slapped an empty homer bucket up on it and it came in @ 2lbs... can anyone out there verify this? Thanks

I've had a MO Smash in primary for 3 weeks, checked it last night it's done and I wanted to cold crash it before kegging so i changed my temperature on my controller and for some stupid ass reason I unplugged my heater and proceeded to plug it into the cold side. Therefore as I was trying to...

I manage a body shop and what you need is some adhesion promoter. probably the best thing to find is a can of Bulldog.. it comes in aresol cans and is sprayed over lightly scuffed plastic. The biggest concern when spraying over anything bare plastics is the release agents from the manufacturing...

Does anyone own one of these chrome ones? Somebody has got to chime in here...

I only wanted to tell everyone to use a fan to blow over the boil to help with foaming and boilover. geeez...

Picked this up on Black Friday from my lhbs. for $30 for 50lbs. i figure i can brew "some" kind of beer. has anyone used it? It's next on the brew list. not sure what i'll brew but wondering if anyones used it?

Now that I know I can fit 3 kegs in the fridge it's getting taps and a paint job... I;ll keep ya all posted on progress..

if it adds oxidation then alot of my beers are probably going to have it.. i plan on using the fan alot. even after knocking down the flame some you still end up with foam issues and boil over. In the past too when i've knocked down the flame I never seem to boil off enough and end up with more...

thought i put up a pic http://pulse.yahoo.com/_4YPK7E4PS4TKNUA6UATZFNOTHQ/album/photos/294161

Finally gave it a whirl to control 13.5 gallons in a keggle. wow it worked better than i could have imagined. I keep an old ocilating fan in the garage for misc and thought i would give it a try. We were boiling down 13.5 gallons and we were past the hot break and had turned down the burner a...

Here's my 3-tier.. all freebie metal.. just stole the burners from stands and bought some plumbing.. http://pulse.yahoo.com/_4YPK7E4PS4TKNUA6UATZFNOTHQ/album/photos/294058 http://pulse.yahoo.com/_4YPK7E4PS4TKNUA6UATZFNOTHQ/album/photos/294059...

Finally took a couple pics of mine. it'll hold 2 ball locks and soon to have a pin lock.. Shanks and taps to come.. probably x-mas $$$ http://pulse.yahoo.com/_4YPK7E4PS4TKNUA6UATZFNOTHQ/album/photos/294057 http://pulse.yahoo.com/_4YPK7E4PS4TKNUA6UATZFNOTHQ/album/photos/294056