Search results

Let me know if you have any questions. This stand is still going strong with very little/no modifications.

im in

The paint is doing fair. It has some light surface rust mainly around the boil kettle but no too bad. I'm diligent about wiping it down after each brew day. One day I may recoat it but it's not there yet. I do wish it was stainless but that would have been a little pricey. There is no...

Sorry for the delay, I just saw your question. The stand is holding up great and I'm not having any issues with the design. I haven't made any modifications to the system, I'm just tweaking methods to make the brew day more efficient. I occasionally have back issues and one of the pros...

I just snapped this pick with a 6 gallon carboy and a 5 gallon bucket. Both fit in there just fine. They were not touching the walls or each other but it was close.

I bought an Idylis 7 cu ft freezer about 2 months ago. I was able to fit two 6 gallon glass carboys on the floor with no issue. It is a little tight with only about a 1/2" to spare but it worked. I put a small flask for my blow off tube on the hump along with a heater and circulation fan. So...

I'm in

I'm in

I'm in

I'm in

On my setup, the lp tank has to be turned on only when the adjustable regulator is in the off position. If the lp tank is opened while the regulator is on, the flow is greatly reduced. It has to due with the reg building up internal pressure. I have the same issue on my BBQ grill.

This is all way over my head and I really don't know if this helps but here is a lookup table we use on some equipment in our lab. It on pg 26 of this manual. It varies from the Vishay one you posted a little bit. To calibrate the probe, the monitor allows you to adjust the resistance using a...

I'm in

I added some WLP099 Super High Gravity Yeast to bottle the barleywine. I should have conditioned the yeast to some high alcohol environment but didn't. It probably died on contact.

I have a 1.150 @ 18% Bourbon Barrel Barleywine and a 1.130 @ 12% Imperial stout in bottles. They are at 8 and 5 months respectively. Both are flat, I knew the risk, I took it and I lost.

aaaaaand I'm in.

There is about 20 drops to a ml.

I'm late to the game here but I'll throw this in any way. Here is a pump up/pump down relay I use on a larger scale in aquaculture. It starts the pump at the low level and stops it at the top, or vise versa, pretty simple but expensive...

I can't really comment on the mods other than say that I've been having no issues with the HLT and MLT on top with the BK down low. I use the pump to sparge and gravity flow from the MLT the BK. I also pump from the wort into the ice HLT via the HERMS coil for cooling. I then pump the...

Damn, I dropped off and missed a few questions. It's working great! I have about 10 batches through the system and finally have my system down. The top tier is holding up well, no need for added support. The automation is working well also, the HLT burner is a bit weak due to some...