Search results

I can't say from experience but I have read other people having the mill get stuck due to underpowered motors. Of course you can put less grain in at a time or maybe double mill instead of having a smaller gap...

Did someone say grain mill? So after the issue with the SS mill having unparallel rollers, then reading about Blichmans's same issue I went ahead and started building up my Monster Mill with American Ale Works motor. Made the cart look like an amp cab... used a magnetic switch that goes to a...

False alarm, looks like Best Buy had a typo. It wasn't making sense to me if it was really 20A it would have flipped the breaker at 15A. So on the back of the model it shows 2A. Here is the Best Buy link vs the actual fridge... should have known better...

No heater but I think I think I found one issue. The Inkbird is rated at 10A and my freezer is 20A. Anyone know of a 20A temp controller?

Mine would constantly let the freezer get too hot, a brand new freezer, alarm kept going off... :(

If you want better quality they usually have a model by Advance Tabco but its a lot more expensive. I have the same brand and I'd probably go with Tabco if I did it again but there's nothing wrong with my sink, no rust, not falling apart.... just not as thick/sturdy as I'd like.

Looks like you can order more hooks too... not bad... https://www.webstaurantstore.com/regency-universal-double-sided-pot-hook/600POTHOOKDB.html

https://www.webstaurantstore.com/regency-15-x-36-stainless-steel-wall-mounted-pot-rack-with-shelf-and-18-galvanized-hooks/600PS1536.html

I didn't have the system in place, I was looking for a solution and came across the SS shelf with hooks that matched the SS sink. I was looking at brew shops online initially thinking they might have something but couldn't find anything... I stumbled across the shelf I posted above. Should...

I'm using tri clamp quick connects, was going to hang them from the middle of the hose with the barbs facing down into the sink so they can drain after being sanitized....

Think I found what I'm looking for. This is the same width as the SS sink, same brand too.

I've been looking for some stainless hooks or some kind of system to hang my brew hoses on the wall above the sink. Can't find much online, anyone have any suggestions?

I was recently thinking how expensive JG is and looking for alternatives. Never had a leak though and looks like they are worth the cost, glad I saw this thread.

It's their new way to add trace metals in the wort that we've apparently been missing 😂 Seriously though, doesn't anyone have QC anymore?

Regency is on the thinner side but it is less expensive... I have one of their sinks and it works ok, would have like better quality but its not going to clean anything better than a heavier sink... I bought it being budget conscious. If I were in a business setting or budget wasn't a concern...

I don't understand how these mills can be so far off. It sounds like poor design and/or assembly.. how hard is it to make it adjustable like a MM? Who is making these decisions, it really doesn't make sense. Hopefully any other companies looking to make a mill are taking notice...

Guess Blichmann is out too, this is really disappointing. I think the only solution I'm aware of at this point is to stick with something like a Monster Mill that you can actually adjust.

There are numerous posts on different forums about this, I linked mine above. Also there are several YouTube videos on the gap being uneven. If SS does not show us proof their mill will function as advertised without us having to do a sieve test it will be the last SS product I ever buy.

If you are ordering one of these mills you need to check if the rollers are parallel. Check out the thread I posted here. The gap on mine varied by more than going from one setting to the next I think setting 4 to setting 5. So far SS did not want to refund my money or replace it with a mill...