Search results

IT Consultant for Microsoft. No college.

I'm in!

Ah very cool. I'm going to get a frame welded at this point I believe.

Got it from Tier1automation.com. Was 120$ with free shipping.

Yeah I still have my cutouts too. Couple reasons I went the lid path... 1. These lids are cheap... For $20 including shipping I'm done with the lid deal. 2. I ended up taking more of the edges off the top after I cut it as it wasn't a perfect circle. So the cutout is a bit small now.

Awesome. Thanks! Got a couple of goodies in: Case is bloody huge.

Correct.

Unfortunately they're backwards. :(

Picked up 2 of these: http://www.ebay.com/itm/1-Each-Marinco-Turn-Pull-Twist-Locking-Plug-and-Receptacle-30-Amp-250-Volt-/321456401194?pt=LH_DefaultDomain_0&hash=item4ad84b6b2a

Would these work? http://www.ebay.com/itm/Leviton-Metal-Midget-Twist-Locking-Flanged-Outlet-Receptacle-ML2R-15A-ML2-MER-/390964823437?pt=LH_DefaultDomain_0&hash=item5b0751c58d

Ordered my breakers and SSRs over the weekend. Need to order some full couplings and go weld stuff together this weekend. Also need the receptacles for pumps and elements. Any brand recommendations? Thanks, Ryan

Hey all, This guy has had some good prices on Teledyne SSRs before and has another batch posted. http://m.ebay.com/itm/321595660389 Ryan

Yeah between the kegs, keg parts, pumps, control panel, and the brew bench I'll be putting together next it'll get up to around 2500$. Will be following ebrewsupply's wiring diagram. And will have a similar setup as his control panel for the physical placement. Bought my enclosure from...

Ordered parts for the Control Panel today. All told I'm around $850 in on the CP with probes. Got a 462 instead of a 460 as well.

Hey Ryane, Do you have any suggestions for a locking receptacle for the pumps? I'm looking at this one but it says 2 pole, will it work? http://www.ebay.com/itm/Leviton-2326-20-Amp-250-Volt-NEMA-L6-20R-2P-3W-Flanged-Outlet-Locking-Recep/290761953210 Thanks, Ryan

Alright here's another version. There's a slot on the right for a whole home water filter (https://www.homebrewtalk.com/f256/water-filter-setup-29145/). On the left is where I mounted my CFC. Thinking that will face outwards. Only real negative is my source of water & electric is over near the...

Aha, great point... Trying to picture a few options, is there another build thread that fixed this? Maybe bring the sides in 2-3" so that there's enough space for the valve to pass through but the front can still rest on it?

And here's an assembled bottom drain with the quick release for the tubing attached. Right now the temperature probe will be placed at the end here, but I may end up moving that down to the pump area to keep wiring cleaner... This would require another pump I think.

Also, here's the brew bench design I'm thinking of. Pumps on the bottom bench, keggles up top. I dropped the front cross beam 5" down so that the bottom drains can come out the front. Any thoughts?

Any thoughts on my control panel layout? The box I'm looking at is here: https://www.tier1automation.com/p-3074-28140.aspx 600mm x 400mm x 200mm Grids are 25mm, but most pieces are spaced 50mm from each other. There's a pretty significant amount of space at the bottom -- maybe leave it open...