Search results

disconnected the pin "11" and the fuse blew

I have today, Monday and Tuesday off work, plenty of time, and thanks for helping me.

reconnected 8 and disconnected 9, the fuse blew

Left pin 1,2, and 4 disconnected and disconnected pin 8, fuse blew again

disconnected 1,2, and 4 of the timer, reconnected the 6 and 9 of the timer, turned power on and the fuse blew

I also tried connecting the PID 9 wire back, the fuse did not blow when it was tested

yes, it didn't blow

disconnected wires 6 and 9 of timer and pump switches work, that did something I just bought 3 packs of fuses

Did you mean pins 6 and 9 at the timer?

disconnected wire connected to 9 on pid and the fuse blew

yes, I have a multimeter

yes, all set to off and nothing connected

The fuse blows right after I turn the power on.

I finished wiring my panel, and checking all wires. The 5 amp fuse is blowing whenever I hit the power button. Any ideas what would cause this? The schematic I used is below. The old, incorrect schematic was removed to not cause confusion. The correct one is here.

I'm in

Ok, changed it, thanks

I am finishing my control panel. I am using this relay. I want to make sure if I have wired this correctly. Here is a picture of what I have done. The diagram I am using is at the bottom

I used Wyeast 4134 Sake Yeast

Yes thanks. I think the problem is when I made the koji it was to humid for too long. That probably produced too much mold. Also I might have fermented about 5F degrees too high.

I used a kab 6 on my 3 tier stand. It started turning the wood dark so I rivetted two square pieces of alunimum flashing together and put it under the burner.