Search results

You can run BPL on thorraks board with the proper .bin file. I have a board set up to run BPL with an OLED display

You need to convert the .brd files to Gerber. PCBWAY used to have a file converter on their website

This board? OSH Park ~

Where are all the beer brewing 3D printers out there?

If something did go wrong with the resistors and Mosfet wouldn't it mostly be a case of something not getting power?I wonder about this sometimes.

I use the same PCB with the same resistors and all of my boards work- These resistors' values were from the BOM for this board.🙂. I got a feeling there are some problems with the wiring at the RJ-45 jacks.I know when I wired mine up I had a hard time figuring out the wiring. I would also run the...

Just to double-check- power is only coming from the screw terminals on the mother PCB? The D1 mini is not connected via the USB connector. I would connect power to the motherboard and then check the voltage with a voltmeter at the various points on the board before I plugged in another D1. What...

https://github.com/thorrak/thorrak_hardware/blob/master/BrewPi%20Sensor%20Boards/RJ-45%20Sensor%20Breakout.md

That's a whole different animal- not sure how that connects or gets power. I think the "door " connections are for two different ways to hook up the door- one by header pins and the other option of using a terminal block - do the traces on the pcb connect to each other?

Sorry to the group Somebody mentioned stupid people and I thought that vid fit

Throw my name into the hat

Any updates?

There are better options if you need to use OLED.

OLED is not compatible with Fermentrack

Throw my name in the hat

Is the 4.7 k resistor installed - the top left-hand corner

I got nothing other than checking all the caps for bulging tops or leaking schmoo