Search results

Unless you have a centrifuge, mechanical filtration should be last.

I haven't done 5 gallons. I would assume it would be fine. The coil is about 5 gallons tall. You could get to strike temperature faster if you aren't recycling. I like to recycle while I'm heating. I use all RO water so I build my brew water while its recycling. and yes all the pots were...

I have the same controller. The dial on the side is probably the thing I use the most. If you have 15 gallons about to foam over you can get it under control in a hurry with the knob, then right back up after it breaks.

The only difference is the controller, and the stand. Just picked the high gravity one because it was cheaper. Saved about 400 bucks vs the blichmann controller. I've got about 20 brews through my system now, and it's been great. I have a lot less trub in the bottom of my fermentation...

Another vote for the 1942.

I'm not sure it's fair to give a thumbs down to new software on a 9 year old platform. Windows 10 works wonderfully, and is leaps and bounds better then 8/8.1 On a current system I would rate windows 10 as nearly as good as windows 7. The only bummer is the discontinuation of media center...

Yea its 2 9/16 nuts that hold the studs that poke thru the kettle wall. I've never removed mine to clean it. Pbw a little heat and then spray it off.

Boil coil is 2 small holes. to remove the coil from the pot. and the electric disconnect is just a big push block thing. it removes really easy to move the pot to clean it.

I have HG blichmann breweasy 10 gallon electric system. Brewed about 150 gallons on it. Saved about 300 bucks total using there EBC III Sv controller. Vs the blichmann controller. Works great haven't had any issues. I'm not sure the noise people say they are hearing running it, mine doesn't...

Firefighter. Training pays some extra overtime. Calls when I'm off site pay extra. Haven't had a call ruin a brew day yet, but I'm sure it's coming.

In for sure.

I heated up and "seasoned" anything that was metal. I don't really think of froglube as lube, more of a coating on the metal of the gun. Then I use a really tiny amount on the metal slide tabs that are embedded in the plastic frame. I did the same thing on the ar15. I broke the bcg down and...

I like it. I shoot mostly glocks, and they feel like the slide is on ball bearings. My AR-15 seems to like it also. I would make sure you don't get the paste to thick near firing pins and extractors. Other than that I've seen guys put a whole mess of the paste in a crock pot and give...

Are you watering at night? Or late in the day? Usually get what you're seeing when the plant is wet all night.

I use a 35 gallon water storage tank from Tractor Supply company. I drilled a hole in it, and installed a float valve. It shuts off right at 30 gallons. I got it mounted on some of that heavy duty shelving from menards. It comes with a bulk head that accepts a 3/4 NPT plastic nipple and...

I've always taken a church approach to any conversation about technique, style, and preference. I nod my head and smile. To argue with any persons hobby gospel is folly. It's exactly the same for SWMBO, she trains Shepard's for IPO (sport protection, obedience, tracking). Everyone knows "the...

Probably depends on what BIAB. Are you talking truly just a pot and a bag, or are you going to get a pump? What size batches do you want to do? How much money do you have? What are you really trying to accomplish? (repeatability / time savings / etc) Are you going electric or gas? Do you...

Brewed Pumpkin Ale https://www.homebrewtalk.com/showthread.php?t=140674 Equipment High Gravity's BrewEasy system with the "SV" controller 15 Gallon Mashtun performance and thoughts With approx. 28 lbs of grains, 4 cans of pumpkin in the mashtun, and a little over half of the total water...

Spiders....... Spiders love to hide in those orifices. Get some pipe cleaner and clean them out once in a while. The webs they spin in there will screw up the gas to air ratio. Depending on the style there can be little holes that draw air into the gas stream. If they are plugged it will...

As someone that interviews people frequently please refrain from the following. 1. The answer, "I'm a hard worker" should never leave your mouth. I assume your going to work or I wouldn't be interviewing you. 2. Please don't swear in the interview. It doesn't matter if the saltiest boot...