Search results

I just bought these burners and hooked them up to my system. I used 1/2" pipe with a 2-stage regulator running 10wc (1/2 psi). The burners have a 3/8" FPT; so you will have to reduce the 1/2" pipe at the burner. I have these set up on my HLT and boil kettle. I can run both at same time and I...

I am starting to do AG brewing and I am looking for some input as to which program works best on a Mac. I am contemplating Beer Alchemy and Beer Smith. Can anyone out there give me some insight as to which one I would best served? Thanks in advance.

I used the vr8200 with transformers from HD. I did not pay much attention to the hook up from the transfer as I could not tell which side was hot. I had the same concern initially but it was not much to be concerned after the fact.

On my build, I incorporated a hex using a 2gal pot running off of a Auber PID and 1400 watt heating element. I have one burner (HLT) running off of a PID with a standing pilot light. The boil kettle burner is running off a similar standing pilot light with an on/off switch to the flame.

Here it is. Just finished and everything works. I am running lp gas at 10wc using 10 jet burner. When looking at my flame pattern, how does the height look? Should I consider lowering the burner? Rhx in advance

I just received my Honeywell VR8200A2124 valves today. Excited to hook them up. Here is the question: 1. Will this transformer work to power these 24v valves...

Can anyone out there shed some light on this?

I have decided on the HW valve. Here is the question, to run this with an Auber PID, what PID do I need? The valve is 24v?? Does the PID need to be the same power? Can I run one these valves with a on/off switch?

Here are two options I am contemplating: A HONEYWELL VR8200A2124 - 24 Vac Dual Standing Pilot Gas Valve with 1/2 in. x 1/2 in. inlet\outlet, standard opening and 3.5 in. wc pressure regulator setting with a and a Q314A586 pilot burner. I think I will need a intermittent pilot controller and...

If I understand correctly, I will should run a dual stage low pressure regulator to get the psi to 0.5 to supply the gas manifold line, which will be 1/2" black iron. From the gas manifold line, I will need to run some type of honeywell gas valve with standing pilot. I have read on some...

Ok...here is what I am thinking. I will use a high pressure regulator from the bottle to a black pipe manifold. From the manifold, it will split to the HLT and the boil kettle. Then a valve attached to each end which will reduce the propane to low pressure. Then, finish the line off with the...

Ok, I have purchased two 10 nozzle jet burners...I want to run my HLT and boil kettle using these burners. Additionally, I want to put the HLT on automation, which I will use a love temp controller. I want to install the boil kettle so I can turn it on/off with a switch on my electronic...

Great! Thanks for the info. How much did they charge you?

Yeah, I'm going to pay. Just want someone who knows what I am doing and perhaps provide a little advice.

Am just about ready to have my keg couplers welded. I am looking for someone in the Tampa area to do the TIG welding for me. looking forward to my first AG batch soon. Can anyone out there assist? Thanks

Wouldn't the sanitation issue posted above be similar for a counterflow?

Thanks. That is a great idea I will certainly include in my build.

I have been using two small bags of ice to chill which is about 3 bucks.

One item of note: I do run ~3 gal of water with Star San through the chiller before I siphon my wort through it.

Question: What is the jug of water for inside of the freezer?