Search results

I do not believe that this is a pressure relief valve, but a pressure reducing valve. ie from 100 psi to a lower pressure of say 10 psi output. a spunding valve is a pressure relief valve which maintains a set pressure on the supply side ie relieving pressure in excess of the setting. I have...

there are several examples of folks just cutting the keg and using the lid. i think the oring takes up most of the variation. i have to put m6 locknuts under the legs of the lid to ensure a good seal on mine. jb

Brewed this about 3 months ago and added carapils and a bit of melanoidin for head retention. Turned out great.

Yes I have a model and drawings for the top piece. Let me know what file format you need. In hindsight I do not believe I would go this route. The plastic collar is held on by 6mm weld on studs and sealed with a pair of o rings. If I do another I will simply cut the oval opening and de-burr...

I use an old cast iron bench capper and bottle exclusively with SN bottles. no problems ever. May be the wing capper.

Thanks for all the responses. I will give it a try and run a second circuit if there is a problem. Jbrow

I am building an electric brew system. I plan on using the 50A gfci breaker in the dist panel for my brew rig and wanted to use the same plug for my AC welder when I am not brewing. Will the breaker trip under load or do I need to install a separate unprotected circuit for the welder? I was...

Just fixed one that had the on/off switch soldered in at an angle. Would not work with faceplate and case on it. Worked fine if disassembled. I would check the s switch. May have been bumped and stuck. Jb

Thx. Mechanical engineer

At last I have all of the pieces for my Fermenter. The goal is to ferment in SS vs Plastic buckets, ferment under pressure, pressure transfer to keg. I am not really driving for Low O2 yet but it is on my mind for the future. I hope to brew this weekend and split the wort to this fermenter and a...

Im in!!!! Thanks for the giveaway.

Looks like its actually a Golden Gate Keg form the 50's no spear, gravity feed.

Also is that a wooden bing in center of the keg?

Hello Anyone shed any light on how the tap and faucet are removed from this keg? Looks like a 1/8 turn bayonet style connection but cannot turn far enough to remove. Is there a ball and spring under it that need compressing? Don't want to break anything.

These guys are bad news. be extremely careful, you DO NOT want to tangle with them either call the nearest university or extension agency or torch it. remember no good deed goes unpunished.....

GLAD YOUR BACK! Would love to try Three Floyds Zombie Dust Clone - All-Grain Recipe Kit

I'm in for the win.

thanks for the clarification. jbrown

So the additions to the mash water would be the post boil volume plus the estimated water loss due to absorption by the grain? Sorry just trying to fully understand the process. jbrown57

in for sure