Search results

That's plenty of power, and your relay will work with either.

I believe cr02 is like your diagram

These are the 2 most common wiring schemes cr02 and cr03. I couldn't tell which one it was.

That's a motorized ball valve. Here is a 3 wire solution from that vendor. https://ussolid.com/motorized-ball-valve-1-2-stainless-steel-electrical-ball-valve-with-full-port-9-24v-dc-and-3-wire-setup-by-u-s-solid.html

Nice!

What size is your control box?

Nice!

Do you have a link for were you sourced your pressure sensors?

Are you planning for any active cooling for those ssr's. I really like the look of your panel layout!

GParkins if you don't mind me asking, who is your supplier for valves? Thanks!

Brundog any update on V1.1?

I believe you are correct, that could save at little money thanks. The only difference one says made in China, the other says made in Yueqing, which is a city in China.

Do you have any additional information or links to confirm that they are the same? Thanks

Anyone here use Auber Instruments' SSR's https://www.auberins.com/index.php?main_page=product_info&cPath=2_30&products_id=30 ? If so are they any good? Any failures? Thanks!

Brundog, I know you posted this before but I can't seem to find it. What are the pro's and con's of each of the temperature sensors that are compatible with BruControl? Thanks

Nice where did you get yours. I think the one I have is too small.

Nice, what size cabinet is that?

This is absolutely correct. It's a heat thing. You wouldn't be using the neutral to it's full capacity, so you would be fine.

Here is a supplier that I use. They sell by the foot with a 10 foot minimum. https://www.wireandcableyourway.com/8-4-soow-portable-cord-600v-non-ul.html?gclid=Cj0KCQjwqsHWBRDsARIsALPWMEOx5uBKYVLpCzrxTYNEIogAjaHBgTF-0oyA6qKyPzaXrsoxMadFxIEaAsCkEALw_wcB

I think the issue is not the 50A wire, but is the 50A spa panel. You can either replace it with a 30A GFCI which are expensive or install a normal 30A breaker immediately downstream of the 50A spa panel GFCI. The dryer outlet receptacle and probably the wiring can't handle 50A.