Search results

I put a piece of racking tube in the inside of the pick up spout. The tube drops to the bottom of my beverage dispenser toward the back. I wedge it forward when I rack into it and allow it to settle with anything I picked up racking falling to the bottom in the front then take the wedge out so...

I have done the same for a few years. I soak hot oxyclean through it for a while and then squeeze a bottles through and then rinse.

I would like a clone for this as well if anyone comes up with one. The Magic Hat site has info, but not enough for me to try making a clone.

put cap on- push button and squeeze out air- Carb - remove chuck- shake - carb - shake -. the plastic bottle will get soft as it need more co2.

I have brewed a few times with maple sap. I usually use twice the amount of sap as I would water boil down like making syrup and then use to brew. Does give a different flavor to the pale ale I make. Little earthy maple notes.

Google books - preview pg 135 Moxie Syrup Wintergreen extract 22ml - 3/4oz gentian extract 22ml - 3/4oz syrup of sarsaparilla 90ml - 3oz caramel colour 15ml - 1/2oz alochol(90%) 30ml - 1oz ******* Simple Syrup 1L - 1qt thinkin' this...

It held up to regular serving psi usually 10 to 12. The white fittings are quick connects 1/4" I think. They sell them for gas but they work for liquid as well. I had them so I could take the tap put and clean it. They are on the gas side as well.

Cut the plastic inside the fridge on the top. Then carefully scrape out the insulation. Then you will see if there is a line and can drill a smaller hole than the one you cut inside. That is what I did with my a mini fridge. I had to put the tubes to one side so they would be away from the...

I use to have a small kegerator that I had a 5L in as well as cornies. Could have easily used all 5L's.

I use to have a small kegerator that I had a 5L in as well as cornies. Could have easily used all 5L's.

Buy a carbonator cap or build one using stainless steel tire stems in the soda cap. You can find directions by searching DIY carbonator caps. A couple of other options come up as well.

Did this the other day. only needed the 1/8 fitting as I had all the rest. I also picked up a small o-ring that fit in the opening before I taped and threaded the 1/8 fitting in. Not leaking at all and I did not put a lot of tape on. I may pick up another so I can have one that hooks up to my...

I did the progression, extract to all grain. Glad I did now because I have a limited number of days I can brew. I brew two different batches on brew day. one all grain and one extract while I finish getting the first into the fermenter and clean up my mash tun, I make a quick extract beer.

My old dorm fridge kegerator died so I picked up a small Chest freezer and made a 3 1/2 keg kegerator. The one with the bear is rootbeer for the kids. I am planning to put a dowel in front of the taps as a lock later. http://share.shutterfly.com/action/welcome?sid=1AZOWrRw4csnOQ

My old dorm fridge kegerator died so I picked up a small Chest freezer and made a 3 1/2 keg kegerator. The one with the bear is rootbeer for the kids. I am planning to put a dowel in front of the taps as a lock later. http://share.shutterfly.com/action/welcome?sid=1AZOWrRw4csnOQ

My old dorm fridge kegerator died so I picked up a small Chest freezer and made a 3 1/2 keg kegerator. The one with the bear is rootbeer for the kids. I am planning to put a dowel in front of the taps as a lock later.

Go to the bottle redemption center and get a 1 gallon wine jug. I get my flip top bottles from the redemption center for like $0.06.

Where did you get the Carrabassett kegs and how much did you pay? I would like a few more kegs that do not cost an arm and leg.

Asked where in ME not what is ME. I am from Maine as well, which is why I wanted to know.

Where in ME?