Search results

Huh, interesting. I never realized that about the pumps. They work pretty good as they are, but I do occassionally have to use the manual bleed off valves next to each of the pumps to get them going. I may have to look into turning them sideways or moving underneath. I'd probably have to...

Where's the delete post button? :)

Been awhile, but the new system is working great. Figured I'd post up some pics! Cheers!

Thread resurrection again! Supabrew, did you end up trying this? I'll have the answer within a couple months. Brewing a stout next weekend and then going to force carb for 2-3 days and then serve on straight Ar. I figure if it goes flat half way through I will just top it back off on the co2...

I guess I was overthinking it. I was planning to use that exact setup for a pickup tube on the bottom of the vessel, but for some reason it didn't occur to me to use a pickup tube for the input. I guess I could just add an appropriate sized piece of tubing to the dip tube and get the fluid in...

I have a 55 gallon setup that I already had a 1.5" tri clover fitting welded near the top as an inlet. Any advice on what the best way to recirculate through this fitting without splashing? Actually I have one installed on all 3 vessels, just trying to determine the best way to get it all...

What do they use in the airplane cockpit? Is that similar to the engraved tags? I ordered some clear vinyl decal paper and I think I'm going to give that a shot, maybe print the text in white ink . I was thinking custom tags at first , but with the decals I could add artwork or a valve...

After a year+ of gathering parts, I finally finished wiring up the control panel for my all electric 50 Amp 1.5 barrel system. She'll be firing a 3 vessel 55 gallon stainless setup with 5500/4500W elements in the BK and HLT. There will be 10 motorized 12V valves for flow control, and all...

You need to change this section #include "Config.h" #include "Enum.h" #include "HWProfile.h" #include <Wire.h> // #include "LOCAL_LiquidCrystalFP.h" #include <LiquidCrystal.h> //Admiro - if you want to use no-FP version remove two LiquidCrystalFP file from sketch #include...

Ok thanks, I thought that was kind of odd getting no response. I sent two messages via the contact link on the bottom right of the brewtroller website, one a few days ago and another about a week before that. Not sure why they didn't go through, i do use mozilla for browsing though, didnt try...

The contrast is good. It works fine with the example sketch in the notes on Amazon and I left it set where it was visible. I think the issue lies with the screen not working with the standard LiquidCrystal.h library or the modified LiquidCrystalFP.h library. The example that works uses a...

Thanks for all the work you have put into this project! I was going to go the premade route, but after contacting Brewtroller a couple times about when the boards will be back in stock, I have yet to get a reply. So I figured I would try getting it going on a mega 2560 board. However, I'm...

I've done several AG batches successfully, and I'm liking the idea of automating things a bit. I'm working on putting together a HERMS system and I'm looking to stay all electric. The scale I'm looking at is 35-40 gallon batches in 55 gallon containers. From what I'm reading others have needed...