Search results

I’ve added 4-5 TCs and 10+ 1/2 NPT fittings to various pots with pull through fittings from brewhardware.com @Bobby_M has great videos showing how to do this.

This is on the SS Unitank? Do you know exactly where the thermowell sits? 4.5, 4 etc.

At what liquid level does the thermowell sit? i.e. @ the 5G mark or lower. Basically what’s the minimum about of liquid is needed to have the thermowell submerged?

Sorry to strum this older post up, but not sure I fully agree with or understand the ability to do 5G batches. I have tried using this for other fermentation of ciders etc. one of the things I don’t like is the thermowell as you mentioned is at ~5.5 G level. This makes it really not feasible to...

I am interested in the contraption you put together for this. DM if that is off topic. Thank you.

FWIW - I have a CF10 and if you do drain off yeast or trub (I have a sight glass), the racking arm is not very long. So what happens is I end up leaving beer behind because the raking arm won't reach the bottom of the fermenter. I know it is clear all the way to the bottom because I can see...

Would you be open to shipping? If so, drop me a PM. We could compare accessories or just bare bone kettle trade.

That fixed it. Thanks! Changing the default date/time format in MySQL is beyond my abilities :)

Looked through the forum and can't find how to change the date/time format. Also, how do you remove what I assume is the identifier for the temp probe?

I have an 'arrangement' through work and I would not actually pay shipping :)

If you decide to ship, I would pay shipping.

Can you tell me how you did this? I may use this as a workaround until @RandR+ finds a solution for the Uno 'locking up'

What else needs to be setup other than keg tare (empty) weight and beer gravity? I am just entering the full weight on the kegs page (Current Weight(lb): (not < Empty Weight))

Just a general question to when you are inventorying your kegs with actual tare weights. When I add a beer to the keg and I have specified a SG for the beer, and I weigh the keg after filling, is RPints calculating the volume for me (beer weight (accounting for SG of beer) + keg tare weight)...

I am running a glycol setup and was curious if there are any suggestions to tighten up the temperature swings I am seeing (62 --> 63.8 so almost a 2 degree swing). My fermenters have insulated jackets as well. I am fermenting an ale and crashing a mead currently. I do not have the luxury of...

So that seems to be part of the issue. When the R3 'freezes up' and the Tx/Rx lights are steady, that number also stops. Since you are seeing the same issues locally, does that mean you may be looking for a solution? Thank you for everything so far.

I have 5 taps, but only 4 physical meters. I will be expanding to another meter soon, but for now I was entering manual pours or manually weighing the 5th keg on tap so that I had all the beers displaying on the frontend. Is that a problem to have one or more 'manual' taps with no flowmeters?

This is the full log between restarts: 2021-01-14 12:20:01 FlowMonitor D giving it a short break to wake up again... 1 2021-01-14 12:20:00 FlowMonitor D resetting alamode to try to force it to listen to us... 1 2021-01-14 12:20:00 PintDispatch D starting setup... 1 2021-01-14 12:19:58...

Restarting via the UI does not work, but running the command sudo /etc/init.d/flowmon restart, did get things going again. Which is how I was getting around this was to restart the RP before I make a pour IF the Tx/Rx lights were on steady. It seems every time the R3 is reflashed it gets...

I have been using a separate power supply for the Uno since day 1. I am now on my 6th USB cable and things will work for a few hours (Tx/Rx lights flashing) and then the lights are just on solid and no pours will register. I have tried swapping and using all 4 USB ports on the RP as well...