Search results

Yes please:rock:

Why is this only available for the US?!

What does the seller on ebay has to say about that?

You need to build the iSpindel completely in order to make it work. You can flash it with the firmware first but it doesn't function until you build the whole thing.

Wow, I would love to add a "The FermTank" to my brewing equipment! Thanks for the opportunity!

I assume that you filled in the wifi SSID and it's password correctly in the configuration of the iSpindel? Maybe hook it up to a serial monitor where you can see what the thing is actually doing as described here: universam1/iSpindel

Does it connect to your router?

That would be great to vacuumseal my hops!!

Maybe you can install a wifi extender close to your keg? I have the ispindel in a refrigarator in my shed(but not in a steel keg btw) which is about 10m from the house. I installed a wifi extender in the shed to connect the ispindel with. The extender connects to the router in the house. The...

My latest brewing pic:

I have to come back at my words there. I just build a couple of new iSpindels and measured the voltage at the pins that go to the battery with the Wemos usb of the fully build iSpindel attached to a PC. When the switch is in the off position I measure zero Volts, when in on position I measure a...

SOLD

Yes I know it seems crazy but throw away your rulebook on fermenting when it comes to kveik yeasts and follow the guidelines in these articles.

Underpitch and high temperatures will bring out the esters. Kveik Yeast: What is it and how to use it How to use kveik

I actually asked that question to the developer a while ago, this was his answer: "The graph shows the average gravity per hour so that's why the latest value does not exactly match the latest raw data value. I do this so that the graph comes out smooth and does not end up with lots of spikes...

That did the trick, angle comes out at a nice 20.5 degrees. So I put this fully assembled and functional iSpindel up for sale for Europe based members.(I think it doesn't make much sense to ship it to the US because that would cost 30 euro on shipping alone). Calibration on a flat surface and...

I made another one, with the exact same parts as the other one above and added 10 ml of epoxy, instead of 20 ml. The angle in plain water came out at 41 degrees:ghostly: So now I just added 3.5 ml of epoxy with a syringe so I could inject it below the hardware and not pour on it, now dry for 24...

Thanks for a quick reply Enkie. Yeah, well that's the thing, I am obsessed when it comes to contamination, don't want it and will do anything to prevent. I think I just try the thing out in my next batch, I can't think of anything why this angle in water is so important that it should be around...

Just build me a new one, but I made an error with the epoxy I pour in the tube to fixate the sled in there, I poured in 20 ml instead of 10 ml. Now the angle in plain water is 9.3 degrees. Anyone knows if this is an issue or is it still good to go?

Well I wouldn't risk it. But maybe someone else can clear this up? However, I saw one flaw in that thread, you can in fact flash the iSpindel firmware onto the d1 mini right out of the box thru usb with nodemcu before assembling the iSpindel.