Search results

Have To Shorten/Solder Comm Cables Next & Install HMI In Top Enclosure, Top Enclosure Will Not Be Mounted There, Just Sitting Out Of Way.

Yes a MicroLogix-1200 WAR (Dual Comm Ports) w/1762-IF4 4-Channel Analog Input Card, Processor Has Memory Chip Installed. The HMI Is a CTC PARKER PS10-2T2-DD3-AD3 Donated From Local Tech College, They Were Running Out Of Donated Equipement Space & Wanted To Focus On Only Allen Bradley...

A Very Well Done Peice Of Art Work, What a Great Look!

Almost Ready For Enclosure Cabinet Mounting, Starting To Clean Up The Wiring Mess, Also, Upgraded 3PH SSR 100Amp Wiring Lugs/Soldered.

My Poor Mans CAD, Microsoft Paint .jpg Format, Cut & Paste Included Power Supply, SSR's, Circuit Breakers, ect I Realize Other's Here Might Use Something Else For Drawing Editor(s), If So, Maybe We Can Ask homebrewtalk To Setup @ Forum Area For Just This Purpose, Supporting Various...

Go Back & Check ALL Electrical Connections For Tightness, You Will Find Others Have Loosen Up From Orignal Installation, This Is a Common Thing. This Is Were PM (Preventive Maintenance) Of Your Electrical Equipement Is Important. Including Your Grounds. After You Have Completed Your Check...

Mixed Bunch, Tri-Clover, Moore, Think 1 Is a Rosemount Cannot Justify a 375 Communicator For Home Use, Not Going To Keep a Database, The 268 & 275 Harts Work Fine & Not Bad Priced On Ebay. The Older Stuff Works Great For Our Appllications & Wallet, It's Amazing How Older Industrial...

Concerning The Gas Valve, Look Into a DIY Manometer To Correctly Setup & Measure Your W.C. Level(s)

Print Is Fairly Large.

You Will See The Print Line#'s On The Left, Wire Labels Will Reference That ie; 98, 98A, 98B, ect

Doubled Checked Wiring w/Updating Elec Prints, Have Installed Temp Labels So Far, Elec Prints Look Good So Next Week Will Do Final Wire Labels To Cross Reference w/ Elec Prints Line#.

Excellent Suggestions, Don't Like Crimping, All Lugs Are Soldered Here and All Stripped Wire Ends Are Soldered As Well Will Locate & Install, Thank's Kladue

The SV's Are For Inlet, Drain and C.I.P. Thank's. I Like Laying a Panel Out Like This, Later On It Takes The Troubleshooting Pain Away. I Could Not Imagine The Time Coding From Scratch, Even w/HMI & PLC Software Takes Alot Of Time From Scratch.

Purchased 1 For Project For 5500W 23Amp Heater Control Sold By Amazon.com ASIN B008DFWTA8 or Search, ALL DEPARTMENTS, amico solid state relays 3PH SSR 100Amp Aprox $49.23

Started This Post In Home Brewing Photo Forum Title Is: PLC/HMI Touchscreen Fermenter Project The Project Has Developed From That To It Really Belongs Here In The Automated Brewing Forum. The Current Status Is Building Up The PLC Electrical Panel Backplane, Most Wiring Is Completed...

I'am Going To Move Future Pics, ect To The Automated Brewing Forum I Just Wanted To Share Some Pic's and Now This Is Growing Into Something That Really Belongs There. Started On Building Electrical Panel Backplane, Will Post Today Progress So Far In Automated Brewing Forum Will Name...

Allen Bradley Makes Alot Of PLC's, They Do Mostly The Same Thing, Exception To Processor Memory Size=Program Size and Restrictions To Logic Instructions, ie; Micrologix-1200 Does Not Support BTW/BTR (Blocks Of Information Write&Reads) a Requirement When Using There HMI-Panelviews, The...

I Use Allen Bradley/Rockwell Software RSlink Lite (Freebe) and RSLogix-500 Not Free, New w/o Student Cost, Aprox $800.00, Purchased Mine From Ebay and Seller Transfered Registration @ AB/Rockwell To Me, Paid Aprox $125.00 About 5 Years Ago. The Software Covers All Allen Bradley SLC5...

Garage Gets Cold In Winter, Help's w/a Stuck Fermentation, Will Use The Heat Stick @ 85-102 Degrees & Cut Off Once Fermentation Has Started/Restarted.

If You Have a Friend That Has a T.I.G. Welder and The Peices Are Not The Same Material, Use Silver Solder, No Flux, Use T.I.G. For Heat Source. Used This Before For Stainless Steel w/Copper & Bronse.