Search results

After a re-flash, it's pinging great again. 4ms and no loss. Web pages load fast. I've let it run with no pinging and no use of the web server/GUI, other than to check uptime. Uptime: Days: 0, Hours: 23, Minutes: 28, Seconds: 59

Even after powering off/on by pulling USB cable, it's bad. I'm thinking the ESP might be hosed. Or maybe a reflash might help. There is 75% packet loss when pinging after rebooting. Once it even went into AP mode and after powering off/on again, it went back into client mode. It's within 4' of...

Recent reboot / crash? I only had logging via telnet, which didn't catch anything. I'll get a laptop down there to power it up and get a serial log going. Probably should have done that first. I didn't reboot it yet. The web GUI is very slow to respond. Actually, pages sometimes even time-out...

Next to one of my APs, the signal strength is -25 dBm (99%) - according to my UniFi AP. When looking at the ESP logs at bootup, it's 1970-01-01T00:00:06Z N: Connected. IP address: 192.168.2.247, RSSI: -50. I start logging over Tera Term/telnet, so if there's another crash I hope I can capture...

I've turned off Ping Plotter from hitting the ESP32. I don't have another WiFi AP, but can move this right next to one of my Unifi APs. I don't know what /api/v1/action/clearcalmode is or what it means to "hit it" - I did delete the Home Assistant MQTT settings in the config, in case that's...

Trouble again. I didn't have the serial monitor running this time, but the web GUI isn't loading again. Getting the browser error: ERR_CONNECTION_REFUSED I started up the serial monitor without rebooting the ESP first to see what it looked like. It's really odd. The screenshot looks mostly like...

Keg Cop was running pretty well until I noticed my Ping Plotter losing contact to it. I did have the logging going with Tera Term. The logs around the trouble are here. Might it give a clue to what went wrong and how I can fix it? I'm not a programmer and have no clue what the error means...

Thanks for that info. Moved power to the USB port instead and have Telnet working. Have to get the flow meter connected and then give it a good test. Need to get a 3-D printer to print cases for all my controllers and electronic stuff. FYI @LBussy A few months ago I had trouble with Keg Cop...

I'm trying Keg Cop again -> this time with PCBs I bought at PCBWay instead of homemade. It was running fine for a day but then I can't get any web pages to load. Instead I get ERR_CONNECTION_REFUSED. I tried the http://192.168.2.247/uptime.csv and still get the Connection Refused. It's currently...

Is there a way to get BrewPiLess-32 to retain a wider time range of data on the temperature/control graph page? It seems to want to reset at random times. Or maybe it's not random and I just don't see the pattern. Maybe it rests after every page load or refresh? I'm using version 4.2.

I know - this thread is pretty old now. But if you get your projects done as slowly as I get mine done...... I have some controllers for sale.

Here's a screenshot of the BrewPiLess in action, controlling temps in my Kegerator. BrewPiLess can do way more than this. But I ferment in cornys under pressure and don't need the temp control when fermenting. Here's the Homebrewtalk thread about BrewPiLess.

The PCBs are available from PCBWay. That's where I got them. I believe you may be able to get the gerbers from there or at BrewPiLess-32-PCB/BPL-32 FAB Files Rev00.zip at master · stefschin/BrewPiLess-32-PCB No, I don't have an enclosure for it. I don't have a 3D printer. I generally use...

I had some spare BrewPiLess-32 boards, so I built working units and have them available for sale. I'm using one to control my Kegerator and it's been working for months without any problems. I'm using a Danby kegerator and controlling the compressor with a ubiquitous blue 10A, 5v Arduino-type...

I think I found the cause of the problem, but don't understand how/why. I noticed my temp sensors weren't showing any values in the GUI. I futzed with the wiring for them and everything started working.

I have a newish install of BrewPiLess. It's been on/off having trouble. I initially thought it was a WiFi problem, but am not sure now. I intitially set a static IP address in the BrewPiLess GUI and also had a static set in my Firewall DHCP server. I removed the Static from BPL and it's only at...

Would it be possible (or difficult to add) flow-meter capability to BrewPiLess? There's enough input/outputs. I'm not a programmer and wouldn't be able to do it myself. I'd like to be able to take the pulses from a flow meter and calibrate to beer flow volume. Then subtract that from a starting...

I've been able to adjust the calibration / offset for only one Dallas sensor on the Device Page, but trying to later go in and change another sensor offset isn't sticking. It always goes back to 0 after refreshing the web page. Do I need to erase it all and set them up again but adjust all...

Thanks @pocketmon - that worked perfect. I noticed that the temperature graph for one of my Dallas sensors appears to have a different behavior than the others. It's like it doesn't have as fine a granularity of precision. Notice how the gray line is flat for longer periods, while the blue and...

Every time I lose power, this returns back to Celsius. Is there a way to have this saved to stay on Fahrenheit after a reboot or power loss?