Search results

+1 on that. Happened to me once. They are clear silicone and easy to miss.

What kind of hose are you using to add water to your setup? A run of the mill garden hose or an potable water RV hose.

Paid

Pm sent

Sent you a pm

How do you keep it anaerobic without flushing with CO2?

My rate of heating is about 3 degrees per minute, so it takes about 15-20 min to get from the mashout temp of 170 to boil. No I have a separate control box for my pump. No the 120V 30A GFCI breakers are NOT cheap, but you remember I got one used at a bargain. No plugs involved, breakers go...

My 5 gallon "countertop" Brutus 20 is a 120v based unit comprised of a 10 gallon cooler and a 10 gallon kettle with a 3000W water heater element. I was fortunately able to score a used 30A GF breaker for my panel for $30 on fleabay. I can tell you it works like a charm. I get between 70 to 75...

MyLHBS is carrying several strains of yeast from Imperial Yeasts of portland, Ore that might have some potential for NEIPAs. Anybody ever try these or know about them? A04 Barbarian Ready to attack your IPA, Barbarian produces stone fruit esters that work great when paired with citrus hops...

The simplest solution would be to bring a third "green" wire attached to the copper pipe with a grounding clamp.

Angie, The HF ratcheting crimper is junk. I bought one a couple of years ago to do some boat re-wiring. Despite trying to adjust it the crimps it made would not pass the pull test. Racked it up to a bad tool purchase.

Anybody know what the timeline for the 2.4 rollout?

I've found that the kettle loses are variable from batch to batch dependent on the amount of hops. The way I've resolved this to my liking is to jack up my batch size to 5.25 gallon then zero out the lautering and kettle loses. This way I usually alway hit my OG and get at least 5 gallons of beer.

One of the little tan ones that I bought over two years ago. Has worked like a trooper all this time. Did they change from a ss spindle to a ceramic recently? Perhaps I should upgrade and maybe go to 24v.

FYI I was starting to brew after a hiatus over the holidays and my cheap compact pump did not function. I took it apart assuming that it was clogged with some hop residue but not so, all channels were clear. What I did find out was that the impeller/magnet was not turning on the shaft. Further...

200\12= 16.6 amps, I guess it will

Gotcha on the IBUs. What yeast do you like for your reds.

What do you consider a "well hopped Amber/red" 35 ibu? Or greater?

As the title suggests I am contemplating putting a sight glass in my system to manage the water volumes. My system is an electric version of Lonnie McAllisters CRDFM and inspired by Jeff Karpinski's two vessel electric system. So, my question is where to put the sight glass; the kettle or the...

Did the same, successfully repaired with jbweld. Further I reinforced it with a thick collar of the same. As a preemptive strike I also reinforced my other no broken pump as well. Nealm