Search results

Yowza that's impressive. After balking a bit i've decided to just start drawing and work my way through it.. it'll make it that much easier to build after i spend time thinking through everything, and like processhead said i'll have it to go with the system. Trying to draw it to scale and...

Sorry for the 2 year bump but i have something kinda similar and it's not worth starting a new thread because it's a long shot. I have a 24x24x8 stainless enclosure i'm looking to do a fairly typical 50a PID (DSPR300 hlt, bk & DSPR320 mt) based back-to-back capable setup. The kicker is i'd...

Upgraded the fans (from .15a to .6a) in the chamber and it made a huge improvement cooling wise. Very pleased so far. Using immersion down to 110 and then kicking this on with plate chiller to finish it, so i can have 60 something wort pretty quickly despite 75 degree groundwater.

Ritebrew is good as well. I just bought 10 packs if 34/70 for about 4 ea

It's alive ish, being tested tonight with 2 ten gallon batches

Went by the store and bought 6 sacks today, thanks for posting.

Loaned it out to a friend and he used it once with great success then about 30 mins into the second brew he said it stopped heating. I think it may have just been the fine tuning phase of the temp control that the grainfather kicks into when within 4 degrees of target (SSR?). Have taken it...

USA

Used walkins can be surprisingly cheap and prob come in the exact dimensions you're looking for.

Figured i'd share my plans for critiquing while i'm in the process. I saw this guy and figured it'd work all right https://www.pbase.com/jas0420/the_fermoire&page=all Due to space constraints in the garage, needing to move it around easily, never wanting to pick up more than 5 gallons of...

In

seems fair to me, guessing there's a just a limited number of potential buyers.

Just kicked this, ended up great after about 3 months. Missed my OG and it only ended up about 8% but was still very good. Used nottingham

I would try it on another GFCI if possible. I've heard they sometimes have intermittent problems with motors in general which may include compressors but i'm not sure why.

My god, I hope i never get 2 emails i don't want.

My order arrived yesterday, thanks for the heads up!

Tried this out with a march 809 and a 240v 4500w (running 120v so 1125) watt element, seems to be doing ok.

In Charleston. Has been brewed with recently and worked fine. 2006 model with Omron E5CS, full stainless stand and cabinet. I use a phone with Beersmith 3 for session. Mostly tri clamp, two false bottoms and three pickup assemblies. Two 15.5g keg fermenters with ball lock top and blowoff...

Would like to replace copper threaded tube and element eventually and upgrade power a bit. Mainly posting to get input so i'll know whether to jump if a deal comes along. Currently element is a 240v 3500 watt running on 120v, so about 900w which is tough for 10 gallon batches, but i am getting...