Search results

yes i have an ispindel connected to the batch, which is working ok

Just reflashed both 8266 with brewpiless 4.2.1 on one and fermwatch v1.1 on the other using nodemcupyflasher as recommended - no change - I suspect the problem lies in the Wi-Fi manager for fermwatch - it says the entered details have been saved but when used again all details are default.

Hi Pete Can't get it to go. - I know you are not a coder ad nor am I - but I am computer literate. I reconfigured to run brewpiless version 4.1 on a dedicated factory resetted esp8266 and then accessed its portal and set the Wi-Fi to my system - all good so far - its recognised on my Wi-Fi as...

which bin file should i run

Thanks Peter - So is BPI is flashed to a ESP32 and fermwatch is flashed to a ESP8266 - how are they connected. I know with the 2.8 SPI TFT there are not enough pins to run temp, cooling and heating - and I was under the impression that Fermwatch will not run on the ESP32 which has enough pins -...

should add that I had Brewfather running with ispindel connected batches and the Postman said all OK

Boy am I frustrated I have followed the Peter Symonds video about getting Fermwatch up and running but I cannot get it to work 1. Flashed the ESP8266 with Brewpiless 4.2.1 using Brewflasher - no problem. 2. logged onto brewpiless and amended as per the video - esp8266 reset 3. Brewflasher would...

BLUE DOG BREWING

My version

I would like to change the font colour of my RP installation (love it - thanks RandR+) from #A0A0A0 to #FFFFFF and have amended the /var/www/html/style.css accordingly but with a reboot it did not change so there must be another css file - anybody know where it is - I can right click on the font...

When I installed RPints I did not select add Motion Sensors - is there a script I can download and add, or do I need to reinstall RPints and select the option t install Motion Detectors

Try Tapitgood - they offer a free taplist for up to four taps

OK I'll rewire to only one ESP8266 and see how that goes but confused what fermentrak actually does - if a separate controller is required for each fermenter may as well have a nano wired to a 1306 with rotary encoder to control each fermenter..

I have five fermenters, not necessarily going all at once but could be - so I need at least 11 io pins (10 for heat/cool and one for DS18B20 probes) and the esp8266 doesn't have that many so I'm stuck with the Arduino boards and have Fermentrack running on a RP3B with 32 bit Buster Legacy, I had...

Wondering if you can help - I have Fermentrack installed on a fresh installation of Buster 32 bit - without issue - except when I am trying to flash a controller - I have tried esp8266, Wavgat Uno R3 they just report failure - managed to flash a nano but fermentrack would not recognise pin...

Thanks - will look into it. I did get the temp to read on pin 4 but it doesn't seem to be updating - temp seems to be right but the time is incorrect

I have your version of RPints running but cannot get the flowmeters Pins (GPIO D5-D13, 5v and gnd), Temp Probe on pin (GPIO 4, 3.3v and gnd (waterproof DS18B20)), or the PIR on pin (GPIO 17, 5v and gnd) to run. Completed a fresh install of Pi and RPints and fitted a new DS18B20 still no good. It...

How did you format your Raspberry Pints like that - its very good and I am having a lot of trouble amending css files - any chance of a css file copy

How did you format your Raspberry Pints like that - its very good and I am having a lot of trouble amending css files - anychane of a css copy

When connecting flowmeters and PIR to the Alamode pins do you configure RP to reflect the GPIO or board pin numbers